etherealengine-matchmaking
##Start minikube:
First, you'll need to start minikube with the ingress addon. This will allow the Open Match Helm chart to install
an ingress that will route incoming traffic to Open Match's frontend service over a configured hostname.
minikube start --addons ingressIf minikube has already been created, you can enable the ingress by running minikube addons enable ingress
Install Helm
Follow the instructions for installing Helm on your OS.
Install Open Match with local open-match Helm chart
A Helm chart containing all of the Open Match resources needed for Ethereal Engine matchmaking is located
in packages/ops/open-match. You can install it by running
helm install --set frontend.host=<hostname> open-match packages/ops/open-match
<hostname> is a hostname that the frontend service will be reachable at, e.g. local-matchmaking.etherealengine.io.
You can set it to be whatever you want. After you do, you'll need to edit your computer's hostfile to point this
hostname to the IP address of minikube.
Point hostname in hostfile to minikube's IP
Run minikube ip. This will give you minikube's IP address.
Next, edit the file hosts in the folder /etc (or whatever your hostfile is called if not on Linux); you may need to execute sudo
privileges to edit it. You'll need to add a line like this:
<minikube ip> <hostname>, e.g.
192.168.99.101 local-matchmaking.etherealengine.io
Make sure to save the file after you've added this line. This will tell your machine to route traffic to that hostname to minikube. When combined with the Ingress that the Open Match Helm chart installs, this will then route the traffic to the frontend service. Be aware that the Ingress is only routing traffic coming in on the path /v1/frontendservice.
- note: sometimes on localhost redis synchronisation is not working correctly,
it's usually leads to "Ticket not found" on getting ticket assignment even if ticket was just created.
if this happens then run
kubectl scale -n open-match statefulset open-match-redis-node --replicas=1to limit redis pod to one.
Build director and matchfunction Docker images
NOTE: If you are building and testing this locally, you can skip to the section "Build and deploy locally in one command". This section and the couple after it lay out in more detail what options there are for building and deploying, primarily for deploying to a non-local cluster. They are both still valid for local deployment to minikube if you want to do things more manually, though.
Navigate to packages/matchmaking and build the director and matchfunction images.
cd packages/matchmaking/
#this line for localhost development
eval $(minikube docker-env)
./build-all-pods.shThis will build the images with no registry by default, e.g. the image names will just be etherealengine-matchmaking-director
and etherealengine-matchmaking-matchfunction. If you wish to build them to a registry,
set the REGISTRY environment variable, e.g. REGISTRY=example-reg ./build-all-pods.sh
If you want to automatically push the images to the registry they've been built towards, add push as a parameter:
REGISTRY=example-reg ./build-all-pods.sh push Otherwise, you'll have to manually push the images to the right repo.
If you are building this locally on minikube, you do not need to push the images anywhere; running eval $(minikube docker-env)
builds the images in minikube's Docker environment, which means it already has access to those images and does not
need to source them from an external Docker registry.
Each of the build scripts will generate a timestamp and use that as the tag for the images that are built. For example,
an image would be generated with a full name of etherealengine-matchmaking-director:23-12-21T12-55-03.
You can see the tags in the build logs, where they're printed out like the following:
BUILDING matchfunction as etherealengine-matchmaking-matchfunction:23-12-21T14-16-09
Install matchmaking via Helm chart
You'll next install the matchmaking deployment using the Helm chart in packages/ops/etherealengine-matchmaking. Make sure that the path at the end of the following command is relative to the directory you're still in; it was written assuming you're in packages/matchmaking after just building the images, and will be different if you're in the repo root or some other directory.
The file referenced below as path/to/matchmaking.values.yaml is a simple configuration file. There is a template for it in
packages/ops/configs/local.matchmaking.template.values.yaml. You should make a copy of this template and remove the
word 'template' from the file name. If you are going to push these images to an external registry, i.e. you're not just
building them locally for minikube, then you'll need to add <REGISTRY>/ to the start of both repositorysettings.
For example, if pushing the image to the Docker Hub repo etherealengine-test, you would make director.image.repository
etherealengine-test/etherealengine-matchmaking-director and matchfunction.image.repository etherealengine-test/etherealengine-matchmaking-matchfunction
If you are installing this on minikube, you don't need to specify a registry. By running eval $(minikube dockerenv),
you're building the images into minikube's Docker environment.
When the values.yaml/Helm config file is ready, run the following command:
helm install -f path/to/matchmaking.yaml --set director.image.tag=<TAG>,matchfunction.image.tag=<TAG> <release>-matchmaking ../ops/etherealengine-matchmaking
where <TAG> is the timestamp tag that can be found on in the builder logs.
<release> should be local if running on minikube, and dev/prod if deploying this to a dev/prod production
environment.
After 30 seconds or so, the matchmaking services should be running.
Updating director or matchfunction
When changes to the director or matchfunction services are made, you'll need to re-build them and re-deploy them.
Navigate to packages/matchmaking. You can run RELEASE=<RELEASE> ./build-all-pods.sh <push> if you want to rebuild both.
If you only want to rebuild one, run RELEASE=<RELEASE> ./build-pod.sh <director/matchfunction> <push>. push is only
needed if you are pushing to an external registry, and not needed if you're building to minikube's Docker environment.
Once the new image(s) have been built (and optionally pushed), run
helm upgrade --reuse-values --set director.image.tag=<TAG>,matchfunction.image.tag=<TAG> <release>-matchmaking ../ops/etherealengine-matchmaking
This will update the matchmaking deployment with the newly timestamp-tagged images. If you only updated and rebuilt
one of the services, and did so by just running build-pod.sh instead of build-all-pods.sh, then you must omit the
--set <service>.image.tag=<TAG> for the service that didn't get rebuilt, since it will not have a new image tag.
For example, if you just updated the matchfunction service, run
helm upgrade --reuse-values --set matchfunction.image.tag=<TAG> <release>-matchmaking ../ops/etherealengine-matchmaking
Build and deploy locally in one command
The script matchmaking/build-all-and-refresh-pods-local.sh can build and deploy the director and matchfunction locally
in one go. Just run
HELM_CONFIG=<path/to/matchfunction.values.yaml> ./build-all-and-refresh-pods-local.sh
where <path/to/matchfunction.values.yaml> is an absolute or relative path to the Helm config file, e.g.
HELM_CONFIG="/home/scott/Documents/matchmaking.values.yaml" ./build-all-and-refresh-pods-local.sh
This will build the two services, timestamp-tag them, then automatically run helm upgrade --install with the
timestamp-tags and the config file, which will install the deployment if it's not already installed and update the tag
if it is, forcing the deployment to download the new versions of the services.
Uninstall Open Match and etherealengine-matchmaking
To uninstall etherealengine-matchmaing, run helm uninstall <release>-matchmaking
To uninstall Open Match, from helm uninstall open-match
misc
===============================================================
Detailed instructions on open match: Install Core Open Match
###hardcoded
game modes hardcoded:
open-match-custom-pods/director/profile.go:24
team size is probably here:
open-match-custom-pods/matchfunction/mmf/matchfunction.go in ticketsPerPoolPerMatch
###cleanup delete custom pods
helm uninstall local-matchmakingdelete open-match
helm uninstall open-match