camera-controls

A camera control for three.js, similar to THREE.OrbitControls yet supports smooth transitions and more features.

Examples

camera move	default user input (Configurable)
Orbit rotation	left mouse drag / touch: one-finger move
Dolly	middle mouse drag, or mousewheel / touch: two-finger pinch-in or out
Truck (Pan)	right mouse drag / touch: two-finger move or three-finger move

Usage

(The below code is for three.js users. If you use react-three-fiber (aka R3F), r3f-ready camera-controls is available on @react-three/drei

import * as THREE from 'three';
import CameraControls from 'camera-controls';

CameraControls.install( { THREE: THREE } );

// snip ( init three scene... )
const clock = new THREE.Clock();
const camera = new THREE.PerspectiveCamera( 60, width / height, 0.01, 1000 );
const cameraControls = new CameraControls( camera, renderer.domElement );

( function anim () {

	// snip
	const delta = clock.getDelta();
	const hasControlsUpdated = cameraControls.update( delta );

	requestAnimationFrame( anim );

	// you can skip this condition to render though
	if ( hasControlsUpdated ) {

		renderer.render( scene, camera );

	}

} )();

Important!

You must install three.js before using camera-controls. Not doing so will lead to runtime errors (undefined references to THREE).

Before creating a new CameraControls instance, call:

CameraControls.install( { THREE: THREE } );

You can then proceed to use CameraControls.

Note: If you do not wish to use the entire three.js to reduce file size(tree-shaking for example), make a subset to install.

import {
	Vector2,
	Vector3,
	Vector4,
	Quaternion,
	Matrix4,
	Spherical,
	Box3,
	Sphere,
	Raycaster,
} from 'three';

const subsetOfTHREE = {
	Vector2   : Vector2,
	Vector3   : Vector3,
	Vector4   : Vector4,
	Quaternion: Quaternion,
	Matrix4   : Matrix4,
	Spherical : Spherical,
	Box3      : Box3,
	Sphere    : Sphere,
	Raycaster : Raycaster,
};

CameraControls.install( { THREE: subsetOfTHREE } );

Constructor

CameraControls( camera, domElement )

camera is a THREE.PerspectiveCamera or THREE.OrthographicCamera to be controlled.
domElement is a HTMLElement for draggable area. (optional. if domElement is omitted here, can be connect later with .connect())

Terms

Orbit rotations

CameraControls uses Spherical Coordinates for orbit rotations.

If your camera is Y-up, the Azimuthal angle will be the angle for y-axis rotation and the Polar angle will be the angle for vertical position.

Dolly vs Zoom

A Zoom involves changing the lens focal length. In three.js, zooming is actually changing the camera FOV, and the camera is stationary (doesn't move).
A Dolly involves physically moving the camera to change the composition of the image in the frame.

See the demo

Properties

Name	Type	Default	Description
`.camera`	`THREE.Perspective \| THREE.Orthographic`	N/A	The camera to be controlled
`.enabled`	`boolean`	`true`	Whether or not the controls are enabled.
`.active`	`boolean`	`false`	Returns `true` if the controls are active updating.
`.currentAction`	`ACTION`	N/A	Getter for the current `ACTION`.
`.distance`	`number`	N/A	Current distance.
`.minDistance`	`number`	`Number.EPSILON`	Minimum distance for dolly. The value must be higher than `0`
`.maxDistance`	`number`	`Infinity`	Maximum distance for dolly.
`.minZoom`	`number`	`0.01`	Minimum camera zoom.
`.maxZoom`	`number`	`Infinity`	Maximum camera zoom.
`.polarAngle`	`number`	N/A	Current polarAngle in radians.
`.minPolarAngle`	`number`	`0`	In radians.
`.maxPolarAngle`	`number`	`Math.PI`	In radians.
`.azimuthAngle`	`number`	N/A	current azimuthAngle in radians ¹.
`.minAzimuthAngle`	`number`	`-Infinity`	In radians.
`.maxAzimuthAngle`	`number`	`Infinity`	In radians.
`.boundaryFriction`	`number`	`0.0`	Friction ratio of the boundary.
`.boundaryEnclosesCamera`	`boolean`	`false`	Whether camera position should be enclosed in the boundary or not.
`.smoothTime`	`number`	`0.25`	Approximate time in seconds to reach the target. A smaller value will reach the target faster.
`.draggingSmoothTime`	`number`	`0.125`	The smoothTime while dragging.
`.azimuthRotateSpeed`	`number`	`1.0`	Speed of azimuth rotation.
`.polarRotateSpeed`	`number`	`1.0`	Speed of polar rotation.
`.dollySpeed`	`number`	`1.0`	Speed of mouse-wheel dollying.
`.truckSpeed`	`number`	`2.0`	Speed of drag for truck and pedestal.
`.verticalDragToForward`	`boolean`	`false`	The same as `.screenSpacePanning` in three.js's OrbitControls.
`.dollyToCursor`	`boolean`	`false`	`true` to enable Dolly-in to the mouse cursor coords.
`.dollyDragInverted`	`boolean`	`false`	`true` to invert direction when dollying or zooming via drag.
`.interactiveArea`	`DOMRect`	N/A	Set drag-start, touches and wheel enable area in the domElement. each values are between `0` and `1` inclusive, where `0` is left/top and `1` is right/bottom of the screen.
`.colliderMeshes`	`array`	`[]`	An array of Meshes to collide with camera ².
`.infinityDolly`	`boolean`	`false`	`true` to enable Infinity Dolly for wheel and pinch. Use this with `minDistance` and `maxDistance` ³.
`.restThreshold`	`number`	`0.0025`	Controls how soon the `rest` event fires as the camera slows

Every 360 degrees turn is added to .azimuthAngle value, which is accumulative.
360º = 360 * THREE.MathUtils.DEG2RAD = Math.PI * 2, 720º = Math.PI * 4.
Tip: How to normalize accumulated azimuthAngle?
Be aware colliderMeshes may decrease performance. The collision test uses 4 raycasters from the camera since the near plane has 4 corners.
If the Dolly distance is less (or over) than the minDistance (or maxDistance), infinityDolly will keep the distance and pushes the target position instead.

Events

CameraControls instance emits the following events.
To subscribe, use cameraControl.addEventListener( 'eventname', function ).
To unsubscribe, use cameraControl.removeEventListener( 'eventname', function ).

Event name	Timing
`'controlstart'`	When the user starts to control the camera via mouse / touches. ¹
`'control'`	When the user controls the camera (dragging).
`'controlend'`	When the user ends to control the camera. ¹
`'transitionstart'`	When any kind of transition starts, either user control or using a method with `enableTransition = true`
`'update'`	When the camera position is updated.
`'wake'`	When the camera starts moving.
`'rest'`	When the camera movement is below `.restThreshold` ².
`'sleep'`	When the camera end moving.
`'rotate'`	When the camera changes any rotation angle / position, fires every frame camera is moving
`'move'`	When camera moves, fires every frame camera is moving
`'forward'`	When camera moves with forward / forward_rotate action
`'click'`	When left mouse button / pointer is down for less then timing threshold and pointer moved less then distance threshold

mouseButtons.wheel (Mouse wheel control) does not emit 'controlstart' and 'controlend'. mouseButtons.wheel uses scroll-event internally, and scroll-event happens intermittently. That means "start" and "end" cannot be detected.
Due to damping, sleep will usually fire a few seconds after the camera appears to have stopped moving. If you want to do something (e.g. enable UI, perform another transition) at the point when the camera has stopped, you probably want the rest event. This can be fine tuned using the .restThreshold parameter. See the Rest and Sleep Example.

User input config

Working example: user input config

button to assign	behavior
`mouseButtons.left`	`CameraControls.ACTION.ROTATE`* \| `CameraControls.ACTION.TRUCK` \| `CameraControls.ACTION.OFFSET` \| `CameraControls.ACTION.DOLLY` \| `CameraControls.ACTION.ZOOM` \| `CameraControls.ACTION.NONE` \| `CameraControls.ACTION.FORWARD_ROTATE`
`mouseButtons.right`	`CameraControls.ACTION.ROTATE` \| `CameraControls.ACTION.TRUCK`* \| `CameraControls.ACTION.OFFSET` \| `CameraControls.ACTION.DOLLY` \| `CameraControls.ACTION.ZOOM` \| `CameraControls.ACTION.NONE` \| `CameraControls.ACTION.FORWARD_ROTATE`
`mouseButtons.wheel` ¹	`CameraControls.ACTION.ROTATE` \| `CameraControls.ACTION.TRUCK` \| `CameraControls.ACTION.OFFSET` \| `CameraControls.ACTION.DOLLY` \| `CameraControls.ACTION.ZOOM` \| `CameraControls.ACTION.NONE` \| `CameraControls.ACTION.FORWARD_ROTATE`
`mouseButtons.middle` ²	`CameraControls.ACTION.ROTATE` \| `CameraControls.ACTION.TRUCK` \| `CameraControls.ACTION.OFFSET` \| `CameraControls.ACTION.DOLLY`* \| `CameraControls.ACTION.ZOOM` \| `CameraControls.ACTION.NONE`
`mouseButtons.leftright` ³	`CameraControls.ACTION.ROTATE`* \| `CameraControls.ACTION.TRUCK` \| `CameraControls.ACTION.OFFSET` \| `CameraControls.ACTION.DOLLY` \| `CameraControls.ACTION.ZOOM` \| `CameraControls.ACTION.NONE` \| `CameraControls.ACTION.FORWARD_ROTATE`

Mouse wheel event for scroll "up/down" on mac "up/down/left/right"
Mouse click on wheel event "button"
Mouse both left and right buttons pressed

* is the default.
The default of mouseButtons.wheel is:
- DOLLY for Perspective camera.
- ZOOM for Orthographic camera, and can't set DOLLY.

fingers to assign	behavior
`touches.one`	`CameraControls.ACTION.TOUCH_ROTATE`* \| `CameraControls.ACTION.TOUCH_TRUCK` \| `CameraControls.ACTION.TOUCH_OFFSET` \| `CameraControls.ACTION.DOLLY`
`touches.two`	`ACTION.TOUCH_DOLLY_TRUCK` \| `ACTION.TOUCH_DOLLY_OFFSET` \| `ACTION.TOUCH_DOLLY_ROTATE` \| `ACTION.TOUCH_ZOOM_TRUCK` \| `ACTION.TOUCH_ZOOM_OFFSET` \| `ACTION.TOUCH_ZOOM_ROTATE` \| `ACTION.TOUCH_DOLLY` \| `ACTION.TOUCH_ZOOM` \| `CameraControls.ACTION.TOUCH_ROTATE` \| `CameraControls.ACTION.TOUCH_TRUCK` \| `CameraControls.ACTION.TOUCH_OFFSET` \| `CameraControls.ACTION.NONE` \| `CameraControls.ACTION.TOUCH_FORWARD_ROTATE`
`touches.three`	`ACTION.TOUCH_DOLLY_TRUCK` \| `ACTION.TOUCH_DOLLY_OFFSET` \| `ACTION.TOUCH_DOLLY_ROTATE` \| `ACTION.TOUCH_ZOOM_TRUCK` \| `ACTION.TOUCH_ZOOM_OFFSET` \| `ACTION.TOUCH_ZOOM_ROTATE` \| `CameraControls.ACTION.TOUCH_ROTATE` \| `CameraControls.ACTION.TOUCH_TRUCK` \| `CameraControls.ACTION.TOUCH_OFFSET` \| `CameraControls.ACTION.NONE` \| `CameraControls.ACTION.TOUCH_FORWARD_ROTATE`
`touches.doubletap` ¹	`CameraControls.ACTION.TOUCH_ROTATE`* \| `CameraControls.ACTION.TOUCH_TRUCK` \| `CameraControls.ACTION.TOUCH_OFFSET` \| `CameraControls.ACTION.DOLLY`

Touch & hold following short tap

* is the default.
The default of touches.two and touches.three is:
- TOUCH_DOLLY_TRUCK for Perspective camera.
- TOUCH_ZOOM_TRUCK for Orthographic camera, and can't set TOUCH_DOLLY_TRUCK and TOUCH_DOLLY.

Methods

`rotate( azimuthAngle, polarAngle, enableTransition )`

Rotate azimuthal angle(horizontal) and polar angle(vertical). Every value is added to the current value.

Name	Type	Description
`azimuthAngle`	`number`	Azimuth rotate angle. In radian.
`polarAngle`	`number`	Polar rotate angle. In radian.
`enableTransition`	`boolean`	Whether to move smoothly or immediately

If you want to rotate only one axis, put a angle for the axis to rotate, and 0 for another.

rotate( 20 * THREE.MathUtils.DEG2RAD, 0, true );

`rotateAzimuthTo( azimuthAngle, enableTransition )`

Rotate azimuthal angle(horizontal) to the given angle and keep the same polar angle(vertical) target.

Name	Type	Description
`azimuthAngle`	`number`	Azimuth rotate angle. In radian.
`enableTransition`	`boolean`	Whether to move smoothly or immediately

`rotatePolarTo( polarAngle, enableTransition )`

Rotate polar angle(vertical) to the given angle and keep the same azimuthal angle(horizontal) target.

Name	Type	Description
`polarAngle`	`number`	Polar rotate angle. In radian.
`enableTransition`	`boolean`	Whether to move smoothly or immediately

`rotateTo( azimuthAngle, polarAngle, enableTransition )`

Rotate azimuthal angle(horizontal) and polar angle(vertical) to the given angle. Camera view will rotate over the orbit pivot absolutely:

Azimuth angle

       0º
         \
 90º -----+----- -90º
           \
           180º

0º front, 90º (Math.PI / 2) left, -90º (- Math.PI / 2) right, 180º (Math.PI) back

Polar angle

180º (Math.PI) top/sky, 90º (Math.PI / 2) horizontal from view, 0º bottom/floor

Name	Type	Description
`azimuthAngle`	`number`	Azimuth rotate angle to. In radian.
`polarAngle`	`number`	Polar rotate angle to. In radian.
`enableTransition`	`boolean`	Whether to move smoothly or immediately

`dolly( distance, enableTransition )`

Dolly in/out camera position.

Name	Type	Description
`distance`	`number`	Distance of dollyIn
`enableTransition`	`boolean`	Whether to move smoothly or immediately

`dollyTo( distance, enableTransition )`

Dolly in/out camera position to given distance.

Name	Type	Description
`distance`	`number`	Distance of dollyIn
`enableTransition`	`boolean`	Whether to move smoothly or immediately

`dollyInFixed( distance, enableTransition )`

Dolly in, but does not change the distance between the target and the camera, and moves the target position instead. Specify a negative value for dolly out.

Name	Type	Description
`distance`	`number`	Distance of dollyIn
`enableTransition`	`boolean`	Whether to move smoothly or immediately

`zoom( zoomStep, enableTransition )`

Zoom in/out camera. The value is added to camera zoom.
Limits set with .minZoom and .maxZoom

Name	Type	Description
`zoomStep`	`number`	zoom scale
`enableTransition`	`boolean`	Whether to move smoothly or immediately

You can also make zoomIn function using camera.zoom property. e.g.

const zoomIn  = () => cameraControls.zoom(   camera.zoom / 2, true );
const zoomOut = () => cameraControls.zoom( - camera.zoom / 2, true );

`zoomTo( zoom, enableTransition )`

Zoom in/out camera to given scale. The value overwrites camera zoom.
Limits set with .minZoom and .maxZoom

Name	Type	Description
`zoom`	`number`	zoom scale
`enableTransition`	`boolean`	Whether to move smoothly or immediately

`truck( x, y, enableTransition )`

Truck and pedestal camera using current azimuthal angle.

Name	Type	Description
`x`	`number`	Horizontal translate amount
`y`	`number`	Vertical translate amount
`enableTransition`	`boolean`	Whether to move smoothly or immediately

`lookInDirectionOf( x, y, z, enableTransition )`

Look in the given point direction.

Name	Type	Description
`x`	`number`	point x
`y`	`number`	point y
`z`	`number`	point z
`enableTransition`	`boolean`	Whether to move smoothly or immediately

`setFocalOffset( x, y, z, enableTransition )`

Set focal offset using the screen parallel coordinates. z doesn't affect in Orthographic as with Dolly.

Name	Type	Description
`x`	`number`	Horizontal offset amount
`y`	`number`	Vertical offset amount
`z`	`number`	Depth offset amount. The result is the same as Dolly but unaffected by `minDistance` and `maxDistance`
`enableTransition`	`boolean`	Whether to move smoothly or immediately

`setOrbitPoint( targetX, targetY, targetZ )`

Set orbit point without moving the camera.

Name	Type	Description
`targetX`	`number`	Orbit center position x
`targetY`	`number`	Orbit center position y
`targetZ`	`number`	Orbit center position z

`forward( distance, enableTransition )`

Move forward / backward.

Name	Type	Description
`distance`	`number`	Amount to move forward / backward. Negative value to move backward
`enableTransition`	`boolean`	Whether to move smoothly or immediately

`forwardView( distance, enableTransition )`

Move forward / backward in view direction.

Name	Type	Description
`distance`	`number`	Amount to move forward / backward. Negative value to move backward
`enableTransition`	`boolean`	Whether to move smoothly or immediately

`moveTo( x, y, z, enableTransition )`

Move target position to given point.

Name	Type	Description
`x`	`number`	x coord to move center position
`y`	`number`	y coord to move center position
`z`	`number`	z coord to move center position
`enableTransition`	`boolean`	Whether to move smoothly or immediately

`elevate( height, enableTransition )`

Move up / down.

Name	Type	Description
`height`	`number`	Amount to move up / down. Negative value to move down
`enableTransition`	`boolean`	Whether to move smoothly or immediately

`fitToBox( box3OrMesh, enableTransition, { paddingTop, paddingLeft, paddingBottom, paddingRight } )`

Fit the viewport to the box or the bounding box of the object, using the nearest axis. paddings are in unit. set cover: true to fill enter screen.

Name	Type	Description
`box3OrMesh`	`THREE.Box3` \| `THREE.Mesh`	Axis aligned bounding box to fit the view.
`enableTransition`	`boolean`	Whether to move smoothly or immediately
`options`	`object`	Options
`options.cover`	`boolean`	Whether fill enter screen or not. Default is `false`
`options.paddingTop`	`number`	Padding top. Default is `0`
`options.paddingRight`	`number`	Padding right. Default is `0`
`options.paddingBottom`	`number`	Padding bottom. Default is `0`
`options.paddingLeft`	`number`	Padding left. Default is `0`

`fitToSphere( sphereOrMesh, enableTransition )`

Fit the viewport to the sphere or the bounding sphere of the object.

Name	Type	Description
`sphereOrMesh`	`THREE.Sphere` \| `THREE.Mesh`	bounding sphere to fit the view.
`enableTransition`	`boolean`	Whether to move smoothly or immediately

`setLookAt( positionX, positionY, positionZ, targetX, targetY, targetZ, enableTransition )`

Look at the target from the position.

Name	Type	Description
`positionX`	`number`	Camera position x.
`positionY`	`number`	Camera position y.
`positionZ`	`number`	Camera position z.
`targetX`	`number`	Orbit center position x.
`targetY`	`number`	Orbit center position y.
`targetZ`	`number`	Orbit center position z.
`enableTransition`	`boolean`	Whether to move smoothly or immediately

`lerpLookAt( positionAX, positionAY, positionAZ, targetAX, targetAY, targetAZ, positionBX, positionBY, positionBZ, targetBX, targetBY, targetBZ, t, enableTransition )`

Similar to setLookAt, but it interpolates between two states.

Name	Type	Description
`positionAX`	`number`	The starting position x of look at from.
`positionAY`	`number`	The starting position y of look at from.
`positionAZ`	`number`	The starting position z of look at from.
`targetAX`	`number`	The starting position x of look at.
`targetAY`	`number`	The starting position y of look at.
`targetAZ`	`number`	The starting position z of look at.
`positionBX`	`number`	Look at from position x to interpolate towards.
`positionBY`	`number`	Look at from position y to interpolate towards.
`positionBZ`	`number`	Look at from position z to interpolate towards.
`targetBX`	`number`	look at position x to interpolate towards.
`targetBY`	`number`	look at position y to interpolate towards.
`targetBZ`	`number`	look at position z to interpolate towards.
`t`	`number`	Interpolation factor in the closed interval. The value must be a number between `0` to `1` inclusive, where `1` is 100%
`enableTransition`	`boolean`	Whether to move smoothly or immediately

`setPosition( positionX, positionY, positionZ, enableTransition )`

Set angle and distance by given position. An alias of setLookAt(), without target change. Thus keep gazing at the current target

Name	Type	Description
`positionX`	`number`	Position x of look at from.
`positionY`	`number`	Position y of look at from.
`positionZ`	`number`	Position z of look at from.
`enableTransition`	`boolean`	Whether to move smoothly or immediately

`setTarget( targetX, targetY, targetZ, enableTransition )`

Set the target position where gaze at. An alias of setLookAt(), without position change. Thus keep the same position.

Name	Type	Description
`targetX`	`number`	Position x of look at.
`targetY`	`number`	Position y of look at.
`targetZ`	`number`	Position z of look at.
`enableTransition`	`boolean`	Whether to move smoothly or immediately

`setBoundary( box3? )`

Set the boundary box that encloses the target of the camera. box3 is in THREE.Box3

Name	Type	Description
`box3`	`THREE.Box3?`	Boundary area. No argument to remove the boundary.

`setViewport( vector4? )`

Set (or unset) the current viewport.
Set this when you want to use renderer viewport and .dollyToCursor feature at the same time.

See: THREE.WebGLRenderer.setViewport()

Name	Type	Description
`vector4`	`THREE.Vector4?`	Vector4 that represents the viewport, or `undefined` for unsetting this.

`setViewport( x, y, width, height )`

Same as setViewport( vector4 ), but you can give it four numbers that represents a viewport instead:

Name	Type	Description
`x`	`number`	Leftmost of the viewport.
`y`	`number`	Bottommost of the viewport.
`width`	`number`	Width of the viewport.
`height`	`number`	Height of the viewport.

`getTarget( out, receiveEndValue )`

Returns the orbit center position, where the camera looking at.

Name	Type	Description
`out`	`THREE.Vector3`	The receiving Vector3 instance to copy the result
`receiveEndValue`	`boolean`	Whether receive the transition end coords or current. default is `true`

`getPosition( out, receiveEndValue )`

Returns the camera position.

Name	Type	Description
`out`	`THREE.Vector3`	The receiving Vector3 instance to copy the result
`receiveEndValue`	`boolean`	Whether receive the transition end coords or current. default is `true`

`getSpherical( out, receiveEndValue )`

Returns the spherical coordinates of the orbit.

Name	Type	Description
`out`	`THREE.Vector3`	The receiving Spherical instance to copy the result
`receiveEndValue`	`boolean`	Whether receive the transition end coords or current. default is `true`

`getFocalOffset( out, receiveEndValue )`

Returns the focal offset, which is how much the camera appears to be translated in screen parallel coordinates.

Name	Type	Description
`out`	`THREE.Vector3`	The receiving Vector3 instance to copy the result
`receiveEndValue`	`boolean`	Whether receive the transition end coords or current. default is `true`

`saveState()`

Set current camera position as the default position

`normalizeRotations()`

Normalize camera azimuth angle rotation between 0 and 360 degrees.

`reset( enableTransition )`

Reset all rotation and position to default.

Name	Type	Description
`enableTransition`	`boolean`	Whether to move smoothly or immediately

`update( delta ): boolean`

Update camera position and directions. This should be called in your tick loop and returns true if re-rendering is needed.

Name	Type	Description
`delta`	`number`	Delta time between previous update call

`updateCameraUp()`

When you change camera-up vector, run .updateCameraUp() to sync.

`applyCameraUp()`

Apply current camera-up direction to the camera.
The orbit system will be re-initialized with the current position.

`connect()`

Attach all internal event handlers to enable drag control.

`disconnect()`

Detach all internal event handlers to disable drag control.

`dispose()`

Dispose the cameraControls instance itself, remove all eventListeners.

`addEventListener( type: string, listener: function )`

Adds the specified event listener.

`removeEventListener( type: string, listener: function )`

Removes the specified event listener.

`removeAllEventListeners( type: string )`

Removes all listeners for the specified type.

`toJSON()`

Get all state in JSON string

`fromJSON( json, enableTransition )`

Reproduce the control state with JSON. enableTransition is where anim or not in a boolean.

Tips

Normalize accumulated azimuth angle:

If you need a normalized accumulated azimuth angle (between 0 and 360 deg), compute with THREE.MathUtils.euclideanModulo e.g.:

const TAU = Math.PI * 2;

function normalizeAngle( angle ) {

	return THREE.MathUtils.euclideanModulo( angle, TAU );

}

const normalizedAzimuthAngle = normalizeAngle( cameraControls.azimuthAngle );

Find the absolute angle to shortest azimuth rotatation:

You may rotate 380deg but actually, you expect to rotate -20deg.
To get the absolute angle, use the below:

const TAU = Math.PI * 2;

function absoluteAngle( targetAngle, sourceAngle ){

  const angle = targetAngle - sourceAngle
  return THREE.MathUtils.euclideanModulo( angle + Math.PI, TAU ) - Math.PI;

}

console.log( absoluteAngle( 380 * THREE.MathUtils.DEG2RAD, 0 ) * THREE.MathUtils.RAD2DEG ); // -20deg
console.log( absoluteAngle( -1000 * THREE.MathUtils.DEG2RAD, 0 ) * THREE.MathUtils.RAD2DEG ); // 80deg

Creating Complex Transitions

All methods that take the enableTransition parameter return a Promise can be used to create complex animations, for example:

async function complexTransition() {
	await cameraControls.rotateTo( Math.PI / 2, Math.PI / 4, true );
	await cameraControls.dollyTo( 3, true );
	await cameraControls.fitToSphere( mesh, true );
}

This will rotate the camera, then dolly, and finally fit to the bounding sphere of the mesh.

The speed and timing of transitions can be tuned using .restThreshold and .smoothTime.

If enableTransition is false, the promise will resolve immediately:

// will resolve immediately
await cameraControls.dollyTo( 3, false );

V2 Migration Guide

camera-controls used to use simple damping for its smooth transition. camera-controls v2 now uses SmoothDamp. one of the benefits of using SmoothDamp is, SmoothDamp transition can be controlled with smoothTime which is approximately the time it will take to reach the end position. Also, the Maximum speed of the transition can be set with max speed.

Due to the change, the following are needed. (if you haven't changed dampingFactor and draggingDampingFactor in v1.x, nothing is needed)

deprecated

dampingFactor (use smoothTime instead)
draggingDampingFactor (use draggingSmoothTime instead)

added

smoothTime
draggingSmoothTime
maxSpeed

...That's it!

Contributors

This project exists thanks to all the people who contribute.

Release

Pre-requisites:

a npm registry up and running with a NPM_TOKEN

 $ export NPM_TOKEN=npm_XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

a Github PAT

  $ export GITHUB_TOKEN=github_pat_XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

$ npm run release -- --dry-run

@twinverse/camera-controls

camera-controls

Examples

Usage

Important!

Constructor

Terms

Orbit rotations

Dolly vs Zoom

Properties

Events

User input config

Methods

rotate( azimuthAngle, polarAngle, enableTransition )

rotateAzimuthTo( azimuthAngle, enableTransition )

rotatePolarTo( polarAngle, enableTransition )

rotateTo( azimuthAngle, polarAngle, enableTransition )

dolly( distance, enableTransition )

dollyTo( distance, enableTransition )

dollyInFixed( distance, enableTransition )

zoom( zoomStep, enableTransition )

zoomTo( zoom, enableTransition )

truck( x, y, enableTransition )

lookInDirectionOf( x, y, z, enableTransition )

setFocalOffset( x, y, z, enableTransition )

setOrbitPoint( targetX, targetY, targetZ )

forward( distance, enableTransition )

forwardView( distance, enableTransition )

moveTo( x, y, z, enableTransition )

elevate( height, enableTransition )

fitToBox( box3OrMesh, enableTransition, { paddingTop, paddingLeft, paddingBottom, paddingRight } )

fitToSphere( sphereOrMesh, enableTransition )

setLookAt( positionX, positionY, positionZ, targetX, targetY, targetZ, enableTransition )

lerpLookAt( positionAX, positionAY, positionAZ, targetAX, targetAY, targetAZ, positionBX, positionBY, positionBZ, targetBX, targetBY, targetBZ, t, enableTransition )

setPosition( positionX, positionY, positionZ, enableTransition )

setTarget( targetX, targetY, targetZ, enableTransition )

setBoundary( box3? )

setViewport( vector4? )

setViewport( x, y, width, height )

getTarget( out, receiveEndValue )

getPosition( out, receiveEndValue )

getSpherical( out, receiveEndValue )

getFocalOffset( out, receiveEndValue )

saveState()

normalizeRotations()

reset( enableTransition )

update( delta ): boolean

updateCameraUp()

applyCameraUp()

connect()

disconnect()

dispose()

addEventListener( type: string, listener: function )

removeEventListener( type: string, listener: function )

removeAllEventListeners( type: string )

toJSON()

fromJSON( json, enableTransition )