Node Thermal Printer

Node.js module for EPSON and STAR thermal printers command line printing.

Installation

$ npm install node-thermal-printer

Linux specific

Linux requires build-essentials

sudo apt-get install build-essential

Features

const ThermalPrinter = require("../node-thermal-printer").printer;
const PrinterTypes = require("../node-thermal-printer").types;

let printer = new ThermalPrinter({
  type: PrinterTypes.STAR,                                  // Printer type: 'star' or 'epson'
  interface: 'tcp://xxx.xxx.xxx.xxx',                       // Printer interface
  characterSet: 'SLOVENIA',                                 // Printer character set - default: SLOVENIA
  removeSpecialCharacters: false,                           // Removes special characters - default: false
  lineCharacter: "=",                                       // Set character for lines - default: "-"
  options:{                                                 // Additional options
    timeout: 5000                                           // Connection timeout (ms) [applicable only for network printers] - default: 3000
  }
});

let isConnected = await printer.isPrinterConnected();       // Check if printer is connected, return bool of status
let execute = await printer.execute();                      // Executes all the commands. Returns success or throws error
let raw = await printer.raw(Buffer.from("Hello world"));    // Print instantly. Returns success or throws error
printer.print("Hello World");                               // Append text
printer.println("Hello World");                             // Append text with new line
printer.openCashDrawer();                                   // Kick the cash drawer
printer.cut();                                              // Cuts the paper (if printer only supports one mode use this)
printer.partialCut();                                       // Cuts the paper leaving a small bridge in middle (if printer supports multiple cut modes)
printer.beep();                                             // Sound internal beeper/buzzer (if available)
printer.upsideDown(true);                                   // Content is printed upside down (rotated 180 degrees)
printer.setCharacterSet("SLOVENIA");                        // Set character set - default set on init

printer.bold(true);                                         // Set text bold
printer.invert(true);                                       // Background/text color inversion
printer.underline(true);                                    // Underline text (1 dot thickness)
printer.underlineThick(true);                               // Underline text with thick line (2 dot thickness)
printer.drawLine();                                         // Draws a line
printer.newLine();                                          // Insers break line

printer.alignCenter();                                      // Align text to center
printer.alignLeft();                                        // Align text to left
printer.alignRight();                                       // Align text to right

printer.setTypeFontA();                                     // Set font type to A (default)
printer.setTypeFontB();                                     // Set font type to B

printer.setTextNormal();                                    // Set text to normal
printer.setTextDoubleHeight();                              // Set text to double height
printer.setTextDoubleWidth();                               // Set text to double width
printer.setTextQuadArea();                                  // Set text to quad area
printer.setTextSize(7,7);                                   // Set text height (0-7) and width (0-7)

printer.leftRight("Left", "Right");                         // Prints text left and right
printer.table(["One", "Two", "Three"]);                     // Prints table equaly
printer.tableCustom([                                       // Prints table with custom settings (text, align, width, cols, bold)
  { text:"Left", align:"LEFT", width:0.5 },
  { text:"Center", align:"CENTER", width:0.25, bold:true },
  { text:"Right", align:"RIGHT", cols:8 }
]);

printer.code128("Code128");                                 // Print code128 bar code
printer.printQR("QR CODE");                                 // Print QR code
await printer.printImage('./assets/olaii-logo-black.png');  // Print PNG image

print.clear();                                              // Clears printText value
print.getText();                                            // Returns printer buffer string value
print.getBuffer();                                          // Returns printer buffer
print.setBuffer(newBuffer);                                 // Set the printer buffer to a copy of newBuffer
print.getWidth();                                           // Get number of characters in one line

Interace options

Value	Descripton
`tcp://192.168.0.99:9100`	Network printer with port
`printer:auto`	Auto select raw system printer via Printer or Electron printer module
`printer:My Printer Name`	Select system printer by name via Printer or Electron printer module module
`\\.\COM1`	Print via local port or file

System Printer Drivers

When using a system printer, you need to provide the driver. Use electron-printer or printer driver:

const ThermalPrinter = require("../node-thermal-printer").printer;
const PrinterTypes = require("../node-thermal-printer").types;
const electron = typeof process !== 'undefined' && process.versions && !!process.versions.electron;

let printer = new ThermalPrinter({
  type: PrinterTypes.EPSON',
  interface: 'printer:My Printer',
  driver: require(electron ? 'electron-printer' : 'printer')
});

Use a custom printer driver:

const ThermalPrinter = require("../node-thermal-printer").printer;
const PrinterTypes = require("../node-thermal-printer").types;

let printer = new ThermalPrinter({
  type: PrinterTypes.EPSON',
  interface: 'printer:My Printer',
  driver: MyCustomDriver
});

// you can also set the driver after init:
printer.setPrinterDriver(MyCustomDriver)


### Example
```js
const ThermalPrinter = require("../node-thermal-printer").printer;
const PrinterTypes = require("../node-thermal-printer").types;

let printer = new ThermalPrinter({
  type: PrinterTypes.EPSON,
  interface: 'tcp://xxx.xxx.xxx.xxx'
});

printer.alignCenter();
printer.println("Hello world");
await printer.printImage('./assets/olaii-logo-black.png')
printer.cut();

try {
  let execute = printer.execute()
  console.error("Print done!");
} catch (error) {
  console.log("Print failed:", error);
}

2D Barcode Examples

Example settings are the default when not specified.

printer.code128("Code128", {
    width: "LARGE",          // "SMALL", "MEDIUM", "LARGE",
    height: 80,              // 50 < x < 80
    text: 2                  // 1 - No text
                             // 2 - Text on bottom
                             // 3 - No text inline
                             // 4 - Text on bottom inline
});

printer.printQR("QR Code", {
    cellSize: 3,             // 1 - 8
    correction: 'M',         // L(7%), M(15%), Q(25%), H(30%)
    model: 2                 // 1 - Model 1
                             // 2 - Model 2 (standard)
                             // 3 - Micro QR
});

printer.pdf417("PDF417", {
    rowHeight: 3,            // 2 - 8
    width: 3,                // 2 - 8
    correction: 1,           // Ratio: 1 - 40
    truncated: false,        // boolean
    columns: 0               // 1 - 30, 0 auto
});

printer.maxiCode("MaxiCode", {
    mode: 4,                 // 2 - Formatted/structured Carrier Message (US)
                             // 3 - Formatted/structured Carrier Message (International)
                             // 4 - Unformatted data with Standard Error Correction.
                             // 5 - Unformatted data with Enhanced Error Correction.
                             // 6 - For programming hardware devices.
});

1D Barcode Example

var data = "GS1-128"     // Barcode data (string or buffer)
var type = 74            // Barcode type (See Reference)
var settings = {         // Optional Settings
  hriPos: 0,             // Human readable character 0 - 3 (none, top, bottom, both)
  hriFont: 0,            // Human readable character font
  width: 3,              // Barcode width
  height: 168            // Barcode height
}

printer.printBarcode(data, type, settings);

Epson Barcode Reference

#	Type	Possible Characters	Length of Data
65	UPC-A	0 - 9	11, 12
66	UPC-E	0 - 9	6 – 8, 11, 12
67	JAN13	0 - 9	12, 13
68	JAN8	0 - 9	7, 8
69	Code39	0 – 9, A – Z, SP, $, %, *, +, -, ., /	1 – 255
70	ITF (Interleaved 2 of 5)	0 – 9	2 – 254 (even number)
71	CODABAR (NW-7)	0 – 9, A – D, a – d, $, +, −, ., /, :	2 – 255
72	CODE93	00h – 7Fh	1 – 255
73	CODE128	00h – 7Fh	2 - 255
74	GS1-128	NUL – SP(7Fh)	2 – 255
75	GS1 DataBar Omnidirectional	0 – 9	13
76	GS1 DataBar Truncated	0 – 9	13
77	GS1 DataBar Limited	0 – 9	13
78	GS1 DataBar Expanded	0 – 9, A – D, a – d, SP, !, ", %, $, ', (, ), *, +, ,, -, ., /, :, ;, <, =, >, ?, _, {	2 - 255

STAR Barcode Reference

var data = "TEST"        // Barcode data (string or buffer)
var type = 7             // Barcode type (See Reference)
var settings = {         // Optional Settings
  characters: 1,         // Add characters (See Reference)
  mode: 3,               // Barcode mode (See Reference)
  height: 150,           // Barcode height (0≤ height ≤255)
}

printer.printBarcode(data, type, settings);

Type

#	Type
0	UPC-E
1	UPC-A
2	JAN/EAN8
3	JAN/EAN13
4	Code39
5	ITF
6	CODE128
7	CODE93
8	NW-7

Settings characters

#	Description
1	No added under-bar characters. Executes line feed after printing a bar code
2	Adds under-bar characters. Executes line feed after printing a bar code
3	No added under-bar characters. Does not execute line feed after printing a bar code
4	Adds under-bar characters. Does not execute line feed after printing a bar code

Settings mode

#	UPC-E, UPC-A, JAN/EAN8, JAN/EAN13, Code128, Code93	Code39, NW-7	ITF
1	Minimum module 2 dots	Narrow: Wide = 2:6 dots	Narrow: Wide = 2:5 dots
2	Minimum module 3 dots	Narrow: Wide = 3:9 dots	Narrow: Wide = 4:10 dots
3	Minimum module 4 dots	Narrow: Wide = 4:12 dots	Narrow: Wide = 6:15 dots
4		Narrow: Wide = 2:5 dots	Narrow: Wide = 2:4 dots
5		Narrow: Wide = 3:8 dots	Narrow: Wide = 4:8 dots
6		Narrow: Wide = 4:10 dots	Narrow: Wide = 6:12 dots
7		Narrow: Wide = 2:4 dots	Narrow: Wide = 2:6 dots
8		Narrow: Wide = 3:6 dots	Narrow: Wide = 3:9 dots
9		Narrow: Wide = 4:8 dots	Narrow: Wide = 4:12 dots

Docs

Tested printers:

Star TSP700
Rongta RP80US
Rongta RP326-USE
EPSON TM-T88V
Posman BTP-R880NP (Type "epson")

Character sets

PC437_USA
PC850_MULTILINGUAL
PC860_PORTUGUESE
PC863_CANADIAN_FRENCH
PC865_NORDIC
PC851_GREEK
PC857_TURKISH
PC737_GREEK
ISO8859_7_GREEK
WPC1252
PC866_CYRILLIC2
PC852_LATIN2
SLOVENIA
PC858_EURO
WPC775_BALTIC_RIM
PC855_CYRILLIC
PC861_ICELANDIC
PC862_HEBREW
PC864_ARABIC
PC869_GREEK
ISO8859_2_LATIN2
ISO8859_15_LATIN9
PC1125_UKRANIAN
WPC1250_LATIN2
WPC1251_CYRILLIC
WPC1253_GREEK
WPC1254_TURKISH
WPC1255_HEBREW
WPC1256_ARABIC
WPC1257_BALTIC_RIM
WPC1258_VIETNAMESE
KZ1048_KAZAKHSTAN

@vendit-dev/thermal-printer-lib-korean

Node Thermal Printer

Installation

Linux specific

Features

Interace options

System Printer Drivers

2D Barcode Examples

1D Barcode Example

Epson Barcode Reference

STAR Barcode Reference

Type

Settings characters

Settings mode

Docs

Tested printers:

Character sets

Readme

Keywords

Package Sidebar

Install

Weekly Downloads

Version

License

Unpacked Size

Total Files

Last publish

Collaborators

@vendit-dev/thermal-printer-lib-korean

Node Thermal Printer

Installation

Linux specific

Features

Interace options

System Printer Drivers

2D Barcode Examples

1D Barcode Example

Epson Barcode Reference

STAR Barcode Reference

Type

Settings characters

Settings mode

Docs

Tested printers:

Character sets

Readme

Keywords

Package Sidebar

Install

DownloadsWeekly Downloads

Version

License

Unpacked Size

Total Files

Last publish

Collaborators

Weekly Downloads