@lyzi/quipuswap-sdk
TypeScript icon, indicating that this package has built-in type declarations

3.1.0-2 • Public • Published

Quipuswap SDK

Install

yarn add @taquito/taquito @quipuswap/sdk

Usage

Tips

  • This module works only with natural numbers. There are no decimals or metadata stuff.
  • Asset type. If id property exists in token structure, the module assumes that this is an FA2 token.
// Contract = taquito contract
type ContractOrAddress = Contract | string;

interface Token {
  contract: ContractOrAddress;
  id?: BigNumber.Value;
}

interface FA2Token extends Token {
  id: BigNumber.Value;
}

type Asset = Token | "tez";

Configure

import { TezosToolkit, MichelCodecPacker } from "@taquito/taquito";
import { ReadOnlySigner } from "@quipuswap/sdk";

const publicKeyHash = "tz1fVQangAfb9J1hRRMP2bSB6LvASD6KpY8A";
const publicKey = "edpkvWbk81uh1DEvdWKR4g1bjyTGhdu1mDvznPUFE2zDwNsLXrEb9K";

const tezos = new TezosToolkit("https://hangzhounet.smartpy.io");
tezos.setSignerProvider(new ReadOnlySigner(publicKeyHash, publicKey));

// Or if you using `privateKey`
import { InMemorySigner } from "@taquito/signer";

InMemorySigner.fromSecretKey(privateKey).then((signer) =>
  tezos.setSignerProvider(signer)
);

Swap

import { swap, batchify } from "@quipuswap/sdk";

const tezos = new TezosToolkit(); // Full sample in "Configure" section

const factories = {
  fa1_2Factory: "KT1HrQWkSFe7ugihjoMWwQ7p8ja9e18LdUFn",
  fa2Factory: "KT1Dx3SZ6r4h2BZNQM8xri1CtsdNcAoXLGZB",
};

(async () => {
  try {
    const fromAsset = "tez";
    const toAsset = {
      contract: "KT1EKo1Eihucz9N4cQyaDKeYRoMzTEoiZRAT",
      id: 0,
    };
    const inputValue = 1_000_000; // in mutez (without decimals)
    const slippageTolerance = 0.005; // 0.5%

    const swapParams = await swap(
      tezos,
      factories,
      fromAsset,
      toAsset,
      inputValue,
      slippageTolerance
    );

    const op = await batchify(tezos.wallet.batch([]), swapParams).send();

    console.info(op.hash);
    await op.confirmation();
    console.info("Complete");
  } catch (err) {
    console.error(err);
  }
})();

Estimate swap

import { estimateSwap } from "@quipuswap/sdk";

const tezos = new TezosToolkit(); // Full sample in "Configure" section

const factories = {
  fa1_2Factory: "KT1HrQWkSFe7ugihjoMWwQ7p8ja9e18LdUFn",
  fa2Factory: "KT1Dx3SZ6r4h2BZNQM8xri1CtsdNcAoXLGZB",
};

(async () => {
  try {
    const fromAsset = "tez";
    const toAsset = {
      contract: "KT1EKo1Eihucz9N4cQyaDKeYRoMzTEoiZRAT",
      id: 0,
    };
    const inputValue = 10_000_000; // in mutez (without decimals)

    const estimatedOutputValue = await estimateSwap(
      tezos,
      factories,
      fromAsset,
      toAsset,
      { inputValue }
    );

    console.info({ estimatedOutputValue });

    const estimatedInputValue = await estimateSwap(
      tezos,
      factories,
      fromAsset,
      toAsset,
      { outputValue: estimatedOutputValue }
    );

    console.info({ estimatedInputValue });
  } catch (err) {
    console.error(err);
  }
})();
  • If you already have dexes, you can use it for estimateSwap():
import { estimateSwap } from "@quipuswap/sdk";

const tezos = new TezosToolkit(); // Full sample in "Configure" section

const factories = {
  fa1_2Factory: "KT1HrQWkSFe7ugihjoMWwQ7p8ja9e18LdUFn",
  fa2Factory: "KT1Dx3SZ6r4h2BZNQM8xri1CtsdNcAoXLGZB",
};

(async () => {
  try {
    const fromAsset = "tez";
    const toAsset = {
      contract: "KT1EKo1Eihucz9N4cQyaDKeYRoMzTEoiZRAT",
      id: 0,
    };
    const inputValue = 10_000_000; // in mutez (without decimals)

    const inputDex = await findDex(tezos, factories, toAsset);
    const estimatedOutputValue = await estimateSwap(
      tezos,
      factories,
      fromAsset,
      toAsset,
      { inputValue },
      { inputDex }
    );

    console.info({ estimatedOutputValue });
  } catch (err) {
    console.error(err);
  }
})();

Add liquidity

import { findDex, addLiquidity } from "@quipuswap/sdk";

const tezos = new TezosToolkit(); // Full sample in "Configure" section

const factories = {
  fa1_2Factory: "KT1HrQWkSFe7ugihjoMWwQ7p8ja9e18LdUFn",
  fa2Factory: "KT1Dx3SZ6r4h2BZNQM8xri1CtsdNcAoXLGZB",
};
const token = {
  contract: "KT1EKo1Eihucz9N4cQyaDKeYRoMzTEoiZRAT",
  id: 0,
};

(async () => {
  try {
    const dex = await findDex(tezos, factories, token);

    const addLiquidityParams = await addLiquidity(
      tezos,
      dex,
      { tezValue: 10_000_000 }
      // or { tokenValue: 4_000 }
      // or { tezValue: 10_000_000, tokenValue: 4_000 }
      //
      // @TIP:
      // If one of the properties is omitted,
      // it will estimate another automatically
    );

    const op = await batchify(
      tezos.wallet.batch([]),
      addLiquidityParams
    ).send();

    console.info(op.hash);
    await op.confirmation();
    console.info("Complete");
  } catch (err) {
    console.error(err);
  }
})();

Remove liquidity

import { findDex, removeLiquidity } from "@quipuswap/sdk";

const tezos = new TezosToolkit(); // Full sample in "Configure" section

const factories = {
  fa1_2Factory: "KT1HrQWkSFe7ugihjoMWwQ7p8ja9e18LdUFn",
  fa2Factory: "KT1Dx3SZ6r4h2BZNQM8xri1CtsdNcAoXLGZB",
};
const token = {
  contract: "KT1EKo1Eihucz9N4cQyaDKeYRoMzTEoiZRAT",
  id: 0,
};

(async () => {
  try {
    const account = "tz1Lx...";
    const slippageTolerance = 0.005; // 0.5%

    const dex = await findDex(tezos, factories, token);
    const share = await getLiquidityShare(tezos, dex, account);

    const lpTokenValue = share.total;
    const removeLiquidityParams = await removeLiquidity(
      tezos,
      dex,
      lpTokenValue,
      slippageTolerance
    );

    const op = await batchify(
      tezos.wallet.batch([]),
      removeLiquidityParams
    ).send();

    console.info(op.hash);
    await op.confirmation();
    console.info("Complete");
  } catch (err) {
    console.error(err);
  }
})();

Initialize liquidity

import { findDex, initializeLiquidity } from "@quipuswap/sdk";

const tezos = new TezosToolkit(); // Full sample in "Configure" section

const factories = {
  fa1_2Factory: "KT1HrQWkSFe7ugihjoMWwQ7p8ja9e18LdUFn",
  fa2Factory: "KT1Dx3SZ6r4h2BZNQM8xri1CtsdNcAoXLGZB",
};
const token = {
  contract: "KT1EKo1Eihucz9N4cQyaDKeYRoMzTEoiZRAT",
  id: 0,
};

(async () => {
  try {
    const tokenValue = 4_000;
    const tezValue = 10_000_000;

    const initializeLiquidityParams = await initializeLiquidity(
      tezos,
      factories,
      token,
      tokenValue,
      tezValue
    );

    const op = await batchify(
      tezos.wallet.batch([]),
      initializeLiquidityParams
    ).send();

    console.info(op.hash);
    await op.confirmation();
    console.info("Complete");
  } catch (err) {
    console.error(err);
  }
})();

Get token price

import { findDex, estimateTezInToken } from "@quipuswap/sdk";

const tezos = new TezosToolkit(); // Full sample in "Configure" section

const factories = {
  fa1_2Factory: "KT1HrQWkSFe7ugihjoMWwQ7p8ja9e18LdUFn",
  fa2Factory: "KT1Dx3SZ6r4h2BZNQM8xri1CtsdNcAoXLGZB",
};
const token = {
  contract: "KT1EKo1Eihucz9N4cQyaDKeYRoMzTEoiZRAT",
  id: 0,
};

(async () => {
  try {
    const dex = await findDex(tezos, factories, token);
    const dexStorage = await dex.contract.storage();

    const tokenValue = 4_000;
    const inTezValue = estimateTezInToken(dexStorage, tokenValue);

    console.info(`4_000 tokens in tez: ${inTezValue}`);
  } catch (err) {
    console.error(err);
  }
})();

TSDX User Guide

Congrats! You just saved yourself hours of work by bootstrapping this project with TSDX. Let’s get you oriented with what’s here and how to use it.

This TSDX setup is meant for developing libraries (not apps!) that can be published to NPM. If you’re looking to build a Node app, you could use ts-node-dev, plain ts-node, or simple tsc.

If you’re new to TypeScript, checkout this handy cheatsheet

Commands

TSDX scaffolds your new library inside /src.

To run TSDX, use:

npm start # or yarn start

This builds to /dist and runs the project in watch mode so any edits you save inside src causes a rebuild to /dist.

To do a one-off build, use npm run build or yarn build.

To run tests, use npm test or yarn test.

Configuration

Code quality is set up for you with prettier, husky, and lint-staged. Adjust the respective fields in package.json accordingly.

Jest

Jest tests are set up to run with npm test or yarn test.

Bundle Analysis

size-limit is set up to calculate the real cost of your library with npm run size and visualize the bundle with npm run analyze.

Setup Files

This is the folder structure we set up for you:

/src
  index.tsx       # EDIT THIS
/test
  blah.test.tsx   # EDIT THIS
.gitignore
package.json
README.md         # EDIT THIS
tsconfig.json

Rollup

TSDX uses Rollup as a bundler and generates multiple rollup configs for various module formats and build settings. See Optimizations for details.

TypeScript

tsconfig.json is set up to interpret dom and esnext types, as well as react for jsx. Adjust according to your needs.

Continuous Integration

GitHub Actions

Two actions are added by default:

  • main which installs deps w/ cache, lints, tests, and builds on all pushes against a Node and OS matrix
  • size which comments cost comparison of your library on every pull request using size-limit

Optimizations

Please see the main tsdx optimizations docs. In particular, know that you can take advantage of development-only optimizations:

// ./types/index.d.ts
declare var __DEV__: boolean;

// inside your code...
if (__DEV__) {
  console.log("foo");
}

You can also choose to install and use invariant and warning functions.

Module Formats

CJS, ESModules, and UMD module formats are supported.

The appropriate paths are configured in package.json and dist/index.js accordingly. Please report if any issues are found.

Named Exports

Per Palmer Group guidelines, always use named exports. Code split inside your React app instead of your React library.

Including Styles

There are many ways to ship styles, including with CSS-in-JS. TSDX has no opinion on this, configure how you like.

For vanilla CSS, you can include it at the root directory and add it to the files section in your package.json, so that it can be imported separately by your users and run through their bundler's loader.

Publishing to NPM

We recommend using np.

Readme

Keywords

none

Package Sidebar

Install

npm i @lyzi/quipuswap-sdk

Weekly Downloads

0

Version

3.1.0-2

License

MIT

Unpacked Size

510 kB

Total Files

37

Last publish

Collaborators

  • ahmed.mahmoudi