@nomicfoundation/hardhat-verify

hardhat-verify

Hardhat plugin to verify the source of code of deployed contracts.

What

This plugin helps you verify the source code for your Solidity contracts. At the moment, it supports Etherscan-based explorers, explorers compatible with its API like Blockscout and Sourcify.

It's smart and it tries to do as much as possible to facilitate the process:

• Just provide the deployment address and constructor arguments, and the plugin will detect locally which contract to verify.
• If your contract uses Solidity libraries, the plugin will detect them and deal with them automatically. You don't need to do anything about them.
• A simulation of the verification process will run locally, allowing the plugin to detect and communicate any mistakes during the process.
• Once the simulation is successful the contract will be verified using the Etherscan API.

Installation

npm install --save-dev @nomicfoundation/hardhat-verify

And add the following statement to your hardhat.config.js:

require("@nomicfoundation/hardhat-verify");

Or, if you are using TypeScript, add this to your hardhat.config.ts:

import "@nomicfoundation/hardhat-verify";

Tasks

This plugin provides the verify task, which allows you to verify contracts through Sourcify and Etherscan's service.

Environment extensions

This plugin does not extend the environment.

Usage

You need to add the following Etherscan and Sourcify configs to your hardhat.config.js file:

module.exports = {
  networks: {
    mainnet: { ... }
  },
  etherscan: {
    // Your API key for Etherscan
    // Obtain one at https://etherscan.io/
    apiKey: "YOUR_ETHERSCAN_API_KEY"
  },
  sourcify: {
    // Disabled by default
    // Doesn't need an API key
    enabled: true
  }
};

Alternatively you can specify more than one block explorer API key, by passing an object under the apiKey property, see Multiple API keys and alternative block explorers.

Lastly, run the verify task, passing the address of the contract, the network where it's deployed, and the constructor arguments that were used to deploy it (if any):

npx hardhat verify --network mainnet DEPLOYED_CONTRACT_ADDRESS "Constructor argument 1"

Complex arguments

When the constructor has a complex argument list, you'll need to write a javascript module that exports the argument list. The expected format is the same as a constructor list for an ethers contract. For example, if you have a contract like this:

struct Point {
  uint x;
  uint y;
}

contract Foo {
  constructor (uint x, string s, Point memory point, bytes b) { ... }
}

then you can use an arguments.js file like this:

module.exports = [
  50,
  "a string argument",
  {
    x: 10,
    y: 5,
  },
  // bytes have to be 0x-prefixed
  "0xabcdef",
];

Where the third argument represents the value for the point parameter.

The module can then be loaded by the verify task when invoked like this:

npx hardhat verify --constructor-args arguments.js DEPLOYED_CONTRACT_ADDRESS

Libraries with undetectable addresses

Some library addresses are undetectable. If your contract uses a library only in the constructor, then its address cannot be found in the deployed bytecode.

To supply these missing addresses, you can create a javascript module that exports a library dictionary and pass it through the --libraries parameter:

hardhat verify --libraries libraries.js OTHER_ARGS

where libraries.js looks like this:

module.exports = {
  SomeLibrary: "0x...",
};

Multiple API keys and alternative block explorers

If your project targets multiple EVM-compatible networks that have different explorers, you'll need to set multiple API keys.

To configure the API keys for the chains you are using, provide an object under etherscan/apiKey with the identifier of each chain as the key. This is not necessarily the same name that you are using to define the network. For example, if you are going to verify contracts in Ethereum mainnet, Optimism and Arbitrum, your config would look like this:

module.exports = {
  networks: {
    mainnet: { ... },
    testnet: { ... }
  },
  etherscan: {
    apiKey: {
        mainnet: "YOUR_ETHERSCAN_API_KEY",
        optimisticEthereum: "YOUR_OPTIMISTIC_ETHERSCAN_API_KEY",
        arbitrumOne: "YOUR_ARBISCAN_API_KEY",
    }
  }
};

To see the full list of supported networks, run npx hardhat verify --list-networks. The identifiers shown there are the ones that should be used as keys in the apiKey object.

Adding support for other networks

If the chain you are using is not in the list, you can manually add the necessary information to verify your contracts on it. For this you need three things: the chain id of the network, the URL of the verification endpoint, and the URL of the explorer.

For example, if Goerli wasn't supported, you could add it like this:

etherscan: {
  apiKey: {
    goerli: "<goerli-api-key>"
  },
  customChains: [
    {
      network: "goerli",
      chainId: 5,
      urls: {
        apiURL: "https://api-goerli.etherscan.io/api",
        browserURL: "https://goerli.etherscan.io"
      }
    }
  ]
}

Keep in mind that the name you are giving to the network in customChains is the same one that has to be used in the apiKey object.

To see which custom chains are supported, run npx hardhat verify --list-networks.

Verifying on Sourcify

To verify a contract using Sourcify, you need to add to your Hardhat config:

sourcify: {
  enabled: true,
  // Optional: specify a different Sourcify server
  apiUrl: "https://sourcify.dev/server",
  // Optional: specify a different Sourcify repository
  browserUrl: "https://repo.sourcify.dev",
}

and then run the verify task, passing the address of the contract and the network where it's deployed:

npx hardhat verify --network mainnet DEPLOYED_CONTRACT_ADDRESS

Note: Constructor arguments are not required for Sourcify verification, but you'll need to provide them if you also have Etherscan verification enabled.

To disable Sourcify verification and suppress related messages, set enabled to false:

sourcify: {
  enabled: false,
}

Using programmatically

To call the verification task from within a Hardhat task or script, use the "verify:verify" subtask. Assuming the same contract as above, you can run the subtask like this:

await hre.run("verify:verify", {
  address: contractAddress,
  constructorArguments: [
    50,
    "a string argument",
    {
      x: 10,
      y: 5,
    },
    "0xabcdef",
  ],
});

If the verification is not successful, an error will be thrown.

Providing libraries from a script or task

If your contract has libraries with undetectable addresses, you may pass the libraries parameter with a dictionary specifying them:

hre.run("verify:verify", {
  // other args
  libraries: {
    SomeLibrary: "0x...",
  }
}

Advanced Usage: Using the Etherscan and Sourcify classes from another plugin

Both Etherscan and Sourcify classes can be imported from the plugin for direct use.

• Etherscan Class Usage

  import { Etherscan } from "@nomicfoundation/hardhat-verify/etherscan";
  
  const instance = new Etherscan(
    "abc123def123", // Etherscan API key
    "https://api.etherscan.io/api", // Etherscan API URL
    "https://etherscan.io" // Etherscan browser URL
  );
  
  if (!instance.isVerified("0x123abc...")) {
    const { message: guid } = await instance.verify(
      // Contract address
      "0x123abc...",
      // Contract source code
      '{"language":"Solidity","sources":{"contracts/Sample.sol":{"content":"// SPDX-Lic..."}},"settings":{ ... }}',
      // Contract name
      "contracts/Sample.sol:MyContract",
      // Compiler version
      "v0.8.19+commit.7dd6d404",
      // Encoded constructor arguments
      "0000000000000000000000000000000000000000000000000000000000000032"
    );
  
    await sleep(1000);
    const verificationStatus = await instance.getVerificationStatus(guid);
  
    if (verificationStatus.isSuccess()) {
      const contractURL = instance.getContractUrl("0x123abc...");
      console.log(
        `Successfully verified contract "MyContract" on Etherscan: ${contractURL}`
      );
    }
  }

• Sourcify Class Usage

  import { Sourcify } from "@nomicfoundation/hardhat-verify/sourcify";
  
  const instance = new Sourcify(
    1,
    "https://sourcify.dev/server",
    "https://repo.sourcify.dev"
  ); // Set chainId
  
  if (!instance.isVerified("0x123abc...")) {
    const sourcifyResponse = await instance.verify("0x123abc...", {
      "metadata.json": "{...}",
      "otherFile.sol": "...",
    });
    if (sourcifyResponse.isOk()) {
      const contractURL = instance.getContractUrl(
        "0x123abc...",
        sourcifyResponse.status
      );
      console.log(`Successfully verified contract on Sourcify: ${contractURL}`);
    }
  }

How it works

The plugin works by fetching the bytecode in the given address and using it to check which contract in your project corresponds to it. Besides that, some sanity checks are performed locally to make sure that the verification won't fail.

Known limitations

• Adding, removing, moving or renaming new contracts to the hardhat project or reorganizing the directory structure of contracts after deployment may alter the resulting bytecode in some solc versions. See this Solidity issue for further information.