@seydx/homebridge-philips-air

homebridge-philips-air

Homeridge Plugin for Philips Air Purifiers

🔴 Foreword 🔴

This plugin is now using py-air-control directly to enable support for newer Philips connected air purifier models.

🟡 Installation 🟡

1. Install Homebridge using the official instructions.
2. Install this plugin using sudo npm install -g homebridge-philips-air --unsafe-perm.
3. Run command in your console sudo chmod -R 777 /usr/lib/node_modules/homebridge-philips-air/sensor.
4. Update your configuration file. See configuration sample below.

If you're using HTTP protocol:

1. Install pip and git using sudo apt install python3-pip git.
2. Install py-air-control using sudo pip3 install py-air-control.

If you're using CoAP protocol:

1. Install pip and git using sudo apt install python3-pip git.

2. Install py-air-control using sudo pip3 install py-air-control.

3. Update CoAPthon3 using sudo pip3 install -U git+https://github.com/Tanganelli/CoAPthon3@89d5173.

   For new firmware version

   (Who get error Unexpected error:'NoneType' object has no attribute "payload")

   1. Found coap_client.py path using sudo find / -name *coap_client.py.
   2. Open file coap_client.py in line 91 change timeout to 60, line 145 same and line 174 add timeout=60 after encrypted_payload
   3. Change in plugin settings Timeout Seconds to 30 or 60.

If you're using Plain CoAP protocol:

1. Install pip and git using sudo apt install python3-pip git.
2. Install py-air-control using sudo pip3 install py-air-control.
3. Update CoAPthon3 using sudo pip3 install -U git+https://github.com/Tanganelli/CoAPthon3@89d5173.
4. Allow non-root to send pings using echo "net.ipv4.ping_group_range=0 1000" | sudo tee -a /etc/sysctl.conf.
5. Update running sysctl configuration using sudo sysctl -p.

🟢 Configuration 🟢

Edit your config.json accordingly. Configuration sample:

"platforms": [{
    "platform": "philipsAir",
    "devices": [{
        "name": "Living Room Purifier",
        "ip": "10.0.1.16",
        "protocol": "http"
    }]
}]

Fields	Description	Required
platform	Must always be philipsAir.	Yes
name	For logging purposes.	No
timeout_seconds	Number of seconds to wait for a response from the purifier. (Default: 5)	No
devices	Array of Philips air purifiers (multiple supported).	Yes
- name	Name of your device.	No
- ip	IP address of your device.	Yes
- protocol	Protocol used by your device: http (default), plain_coap, coap	No
- sleep_speed	Does this device support 'sleep' speed?	No
- light_control	Expose device lights as lightbulbs.	No
- allergic_func	Does this device support 'allergic' function?	No
- temperature_sensor	Expose device temperature as temperature sensor.	No
- humidity_sensor	Expose device humidity as humidity sensor.	No
- polling	Adding a refresh time for the all sensors in seconds.	No
- humidifier	Adding humidified support.	No
- logger	Getting data from humidity and temp sensors and save value into txt file.	No