DotsScript

DotsScript is a simple JavaScript library that makes your JavaScript code much simpler by making the whole code using 2 characters only, the . and the ᱹ character.

Installation

You can install DotsScript by using the following command:

npm install dotsscript

Or yarn:

yarn add dotsscript

You can also install it globally by using the following command:

npm install -g dotsscript

Or yarn:

yarn global add dotsscript

Usage

You can use DotsScript by importing the library in your JavaScript file:

import 'dotsscript';

// Your code here

Or you can run it in the terminal by using the following command:

dot index.ds

Where index.ds is the file that contains your DotsScript code.

Example

Here is an example of how you can use DotsScript:

import 'dotsscript';

ᱹ.ᱹᱹ.ᱹᱹᱹ.ᱹᱹ.ᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹ.ᱹᱹ.ᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹ.ᱹᱹ.ᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹ.ᱹᱹ
  .ᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹ.ᱹᱹ.ᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹ.ᱹᱹ.ᱹᱹᱹᱹᱹ.ᱹᱹᱹᱹᱹ.ᱹᱹᱹᱹᱹ.ᱹᱹ.ᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹ.ᱹᱹ
  .ᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹ.ᱹᱹ.ᱹᱹᱹᱹᱹᱹᱹ.ᱹᱹᱹᱹᱹᱹ.ᱹᱹᱹᱹᱹᱹᱹᱹᱹ.ᱹᱹᱹᱹᱹᱹ.ᱹᱹᱹ.ᱹᱹᱹ.ᱹᱹᱹᱹᱹᱹᱹᱹ.ᱹᱹ.ᱹᱹᱹᱹᱹ
  .ᱹᱹ.ᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹ.ᱹᱹ.ᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹ.ᱹᱹ.ᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹ.ᱹᱹᱹᱹᱹ.ᱹᱹᱹ.ᱹᱹᱹᱹᱹᱹ.ᱹ.ᱹᱹᱹ
  .ᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹ.ᱹᱹ.ᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹ.ᱹᱹ.ᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹ.ᱹᱹ
  .ᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹ.ᱹᱹ.ᱹᱹᱹᱹ.ᱹᱹᱹᱹᱹᱹ.ᱹᱹ.ᱹᱹᱹᱹᱹᱹ.ᱹᱹᱹ.ᱹᱹᱹᱹᱹᱹ.ᱹᱹᱹᱹᱹᱹᱹᱹᱹᱹ.ᱹ

This code is equivalent to the following code:

console.log('Hello, World!');

As you can see, the code is much simpler and do not contain any characters that can confuse you.

Documentation

The global object ᱹ is the main object that you can use to access the DotsScript API. It contains the following properties:

Property	Description
ᱹ	Execute the code and returns a new ᱹ object
ᱹᱹ	Lower-case letters from a to z
ᱹᱹᱹ	Upper-case letters from A to Z
ᱹᱹᱹᱹ	Numbers from 0 to 9
ᱹᱹᱹᱹᱹ	Special characters *+,-./
ᱹᱹᱹᱹᱹᱹ	Special characters !"#$%&'()
ᱹᱹᱹᱹᱹᱹᱹ	Special characters []^_`
ᱹᱹᱹᱹᱹᱹᱹᱹ	Special characters :;<=>?@
ᱹᱹᱹᱹᱹᱹᱹᱹᱹ	Special characters {|}~

After accessing the desired group, enter ᱹ n times as the property name to access the desired character where n is the index of the character in the group.

For example, to access the character f, you can use the following code:

ᱹ.ᱹᱹ.ᱹᱹᱹᱹᱹᱹ

This will add the character f to the code and will return the ᱹ object so you can continue chaining the characters.

After you finish chaining the characters, simply add a .ᱹ at the end of the chain to execute the code. This will execute the code and return a new ᱹ object so you can continue writing the code.

Note: After each execution, the code will reset so you can start a fresh new code.

License

This project is licensed under the MIT License - see the LICENSE file for details.

Contributing

You can contribute to this project by forking this repository and creating a pull request.