Gateway Lite

An HTTP/HTTPS frontend express server for proxying to plain HTTP backends. Supports multiple domains, redirect, proxy paths, basic auth and automatic Lets Encrypt certificates.

Currently only designed for URLs structures like this:

Designed to to be able to replace Nginx in your deployment. Express is much easier to work with in many circumstances than Nginx so it might well be easier to get the configuration you need using this project as a starting point.

CAUTION: Under active development, not ready for production use by people outside the development team yet.

The basic idea is that you create a directory structure of domains in this structure with one directory for each domain you want to support:

domain/
├─── www.example.localhost
│   ├── proxy.json
│   ├── redirects.json
│   ├── sni
│   │   ├── cert.pem
│   │   └── key.pem
│   ├── users.json
│   ├── pwa.json
│   └── webroot
│       └── .well-known
│           └── acme-challenge
└── some.example.com
    └─── ... same as above

The different files and directories for each domain configure different aspects of the gateway.

The project is available as a docker container here: https://hub.docker.com/r/thejimmyg/gateway-lite/

If you have two variants of the same domain, never symlink the directories because the certificates placed in each are for the specific domains. You must create a directory structure for each.

Next is a description of all the configuration options. Each of these is run in the order they are described here, so SSL checking happens before redirects which happen before auth which happens before proxying.

webroot

This is a directory which contains a .well-known/acme-challenge directory that certbot can use to automatically renew SSL certificates. See Certbot section later.

Automatic Redirects (no file, always enabled)

Any bare domains (e.g. example.com but not subdomain.example.com) get redirected to the HTTPS equivalent at the www subdomain. So for example, all these URLs get redirected to https://www.example.com:

redirect.json

A JSON file (must be valid JSON, not just JavaScript) that contains the set of redirects you would like perfomed. For example:

{
  "/some-path": "/"
}

users.json

A JSON file structured like this:

{"admin": "supersecret"}

Usernames are case insensitive, so it makes sense to specify them all as lowercase. Be careful not to add two keys with different cases as it is not guaranteed which associated password would be used.

CAUTION: Not terribly secure, plain passwords. But OK for now.

This defines all the users who can sign into the system.

pwa.json

If this file is present, we treat this domain as hosting a progressive web app. Specifically, Gateway Lite will:

Generate a service worker at serviceWorkerUrl (by default /sw.js) such that the start URL, network error URL and all the other URLs you need are cached for offline use when there is a network error
Generate an application manifest at manifestUrl (by default manifest.json)

Together these will enable your website to be added to the home screen on Android and iOS as well as made into a Chrome app by Chrome or on Chromebooks.

You'll also need to make sure all your pages have this script in them to load the service worker (where /sw.js matches the serviceWorkerUrl value:

if ('serviceWorker' in navigator) {
  navigator.serviceWorker.register('/sw.js')
  .then(function(reg) {
    // registration worked
    console.log('Registration succeeded. Scope is ' + reg.scope);
  }).catch(function(error) {
    // registration failed
    console.log('Registration failed with ' + error);
  });
}

and that the head contains markup similar to the following but reflecting the real paths you are using:

<meta name="mobile-web-app-capable" content="yes">
<meta name="apple-mobile-web-app-capable" content="yes">
<link rel="manifest" href="/public/theme/manifest.json">
<meta name="apple-mobile-web-app-status-bar-style" content="black">
<meta name="theme-color" content="#000000" />
<link rel="apple-touch-icon" href="/public/theme/icon192.png">
<link rel="icon" sizes="192x192" href="/public/theme/icon192.png">
<link rel="shortcut icon" type="image/png" href="/public/theme/icon.png">

Here is a sample pwa.json you can customise:

{
    "name": "My App",
    "shortName": "myapp",
    "display": "standalone",
    "startUrl": "/start",
    "networkErrorUrl": "/network-error",
    "serviceWorkerUrl": "/sw.js",
    "manifestUrl": "/manifest.json",
    "urlsToCache": [
       ["/edit/public/theme/bootstrap.min.js", "/upload/public/theme/bootstrap.min.js"],
       ["/edit/public/theme/icon.png"],
    ],
    "backgroundColor": "#fffff",
    "themeColor": "#000000",
    "version": "0.1.0",
    "defaultLocale": "en",
    "description": "An app",
    "icon192Url": "/public/icon192.png",
    "icon192File": "./icon192.png",
    "icon512Url": "/public/icon512.png",
    "icon512File": "./icon512.png"
}

The urlsToCache option is where you specify all the extra resources your network error and start pages will need in order to render correctly when there is no network available. The 192 and 512 icons are served automatically, so you don't need to specify them again.

Sometimes the same file is served at multiple URLs in your site. For each array in the array of arrays structure, the generated service worker only fetches a response for the first of each of the listed files and uses that cached response to serve the requests for the others. In the example above /edit/public/theme/bootstrap.min.js would be fetched and then cached by the browser as both /edit/public/theme/bootstrap.min.js and /upload/public/theme/bootstrap.min.js with only the one download.

The version option is included in the served /sw.js file, so that when you change version number, all browsers will re-download the URLs they need. **Caution: If you forget to update the version number, some browsers might use old versions of those files, so update the version number any time any of the urlsToCache, startUrl or networkErrorUrl change.

The icon files are automatically served from the domain directory (the one containing the pwa.json path).

proxy.json

[
  ["/v2", "registry:5000/v2"],
  ["/", "hello:8000/world"]
]

Redirects /v2/ to http://registry:8000/v2/. In this example hello and registry are an internal DNS name set up by docker-compose (see the Docker section below) but you can also have normal hosts like my.internal.domain.example.com.

The downstream destinations are checked against the request path from top to bottom, so if you had put the hello before registry, then registry would never be accessible - all paths start with /, so /v2/ would never be checked.

Because a path is specifed for "hello:8000/world", requests to / will go to hello:8000/world/.

The third argument is optional, but if specified can have these keys:

auth - can be false (default) to mean no security is added or true to mean the user has to sign in with a credential in users.json to be able to access the route
authExceptOptions - can be false (default) to mean no security is added or true to mean the user has to sign in with a credential in users.json to be able to access the route, except if it is an OPTIONS request which will get passed through anyway. This is handy for enabling CORS pre-flight requests.
cascade - can be set to true to enable cascade behaviour. In this mode if a downstream server returns a 404, Gateway Lite will simply try the next downstream server
limit - the maximum size of an incoming request specified in bytes.js format. Default is 500mb.
ws - Whether to support websocket proxying too. Default is false. If set to true you can't use the limit or cascade options

Internally, the path you specify as the first argument is passed to app.use() not app.all() so that any sub-path is also proxied.

CAUTION: Proxying is always done over HTTP though, so make sure the hosts being proxied to are on a trusted network or the same computer otherwise security credentials etc will be sent unencrypted by the proxy to the destination server.

NOTE: If you secure a route and sign in with Basic auth using the credentials in your users.json file, the browser saves your credentials until you exit the browser or clear your cache. Closing the tab is not enough.

Set up a testing certificate

For local testing, let's imagine you want to use the domain www.example.localhost.

You can create certificates as described here:

https://letsencrypt.org/docs/certificates-for-localhost/

You'll need to put them in the directory domain/www.example.localhost/sni in this example. Here's some code that does this:

mkdir -p domain/www.example.localhost/sni
openssl req -x509 -out domain/www.example.localhost/sni/cert.pem -keyout domain/www.example.localhost/sni/key.pem \
  -newkey rsa:2048 -nodes -sha256 \
  -subj '/CN=www.example.localhost' -extensions EXT -config <( \
   printf "[dn]\nCN=www.example.localhost\n[req]\ndistinguished_name = dn\n[EXT]\nsubjectAltName=DNS:www.example.localhost\nkeyUsage=digitalSignature\nextendedKeyUsage=serverAuth")

Now edit your /etc/hosts so that your domain really points to 127.0.0.1 for local testing. You should have a line that looks like this:

127.0.0.1	localhost www.example.localhost example.localhost

On macOS, to make the browsers trust this certificate follow these steps:

Visit the URL in chrome https://www.example.localhost:3000/
Click on Not Secure in the URL bar, and then on Certificate (invalid)
Drag the big certificate icon to your Desktop
Load Keychain Access (from your Applications->Utilitites folder or from Spotlight)
Click on System in the Keychains panel in the top right
Drag the certificate from your Desktop into the list of System certificates
Enter your password to approve the drag
Double click the certificate from the the location you dragged it to in the list
Expand the Trust section
Change When using this certificate from Use System Defaults to Always Trust. This changes the other dropdowns too.
Close the popup and enter your password again to confirm
Close Keychain Access
Visit the URL again in the browser

The certificate should now be trusted in other browsers like Safari too (but won't be trusted by curl, you should use the -k option to curl to ignore invalid certificates).

Install and Run

npm install
DEBUG=gateway-lite npm start -- --https-port 3000 --port 8001 --cert domain/www.example.localhost/sni/cert.pem --key domain/www.example.localhost/sni/key.pem --domain domain --lets-encrypt --email james@example.com --user='{"www.example.localhost": {"hello": "eyJoYXNoIjoiU2xkK2RwOGx3cFM1WDJzTHlnTUxmOXhNTlZ5NHV5UjZwK3pQTGhNLzJqMVRlRTF5Q1AxbURzQkpvSTFKRlBSd3V1akIrcng0aDhxNlJBNXRuRVlWUVNpWiIsInNhbHQiOiIwU3NIZnJDMEY1OUZZQmhHSnRKb2QvN3NMTzh3Um82Wm5mTnl6VThIeHYyV2FrdWd6dDhZc09nSDJwUHBiMnAxQlczU1BTWDN5L29GczlaN1NqTktpc2h3Iiwia2V5TGVuZ3RoIjo2NiwiaGFzaE1ldGhvZCI6InBia2RmMiIsIml0ZXJhdGlvbnMiOjcyNjIzfQ=="}}' --proxy='{"www.example.localhost": [["/auth", "localhost:8000/auth", {"auth": true}]]}' --redirect='{"www.example.localhost": {"/some-path": "/"}}' --pwa='{"www.example.localhost": {"networkErrorUrl":"/auth/network-error", "icon192Url":"/public/theme/icon192.png", "startUrl":"/auth/start"}}'

You can get further debugging with DEBUG=gateway-lite,express-http-proxy.

You can put an icon at domain/www.example.com/icon192.png if you want one displayed at /public/theme/icon192.png.

The certificates you specify here are used if a SNI match can't be found to use a better certificate for the domain.

The example above also enables service workers.

Caution: When using service workers the browser caches resources so it can be confusing to debug things. To force the browser to refresh, try setting a new version number, or clear the browser service worker cache.

To test everything is working, run a server on port 8000. There is a suitable project called express-downstream but you could run any server.

Now visit https://www.example.localhost:3000/some-path and after being redirected to / and you should see the message proxied from the downstream server.

If you visit https://www.example.localhost:3000/auth you should be prompted to sign in. The username hello and password world should be accpeted:

curl -k -v -u hello:world https://www.example.localhost:3000/auth
# A different case username works too:
curl -k -v -u HeLlo:world https://www.example.localhost:3000/auth

If you don't have a separate downstream server running or you visit / instead of /auth you'll see {"error":"504"} instead. With the wrong password you'd see HTTP/1.1 401 Unauthorized in the response headers.

You can use plain text passwords instead of the password hashes if you prefer, as long as they are less than or equal to 64 characters long. You can generate your own hashes by running this server, signing in with hello and world and visiting the hash generator at http://localhost:8000/hash

npm install express-mustache-jwt-signin
cd node_modules/express-mustache-jwt-signin
USERS_YML=yaml/users.yml MUSTACHE_DIRS="views-overlay" PUBLIC_FILES_DIRS="public-overlay" SCRIPT_NAME="" HTTPS_ONLY=false PORT=8000 SECRET='reallysecret' DEBUG=express-mustache-jwt-signin,express-mustache-jwt-signin:credentials,express-mustache-jwt-signin:hash,express-mustache-overlays npm start

Then return to the directory for gateway-lite with:

cd ../../

When visiting /auth with the express-mustache-overlays downstream server through the PWA-enabled proxy, you should see that the scripts are only fetched once, and that as you navigate from page to page, PJAX is used (look in the console to check there aren't full page refreshes). You should also find the network error page is dipslayed if you stop one of the servers, and an service worker and app manifest are set up for you.

Docker Compose and Certbot

One of the possibilities this project enables is to run multiple services on the same physical machine. A good architecture for doing this is to have gateway-lite proxy to a Docker registry container for pushing docker containers too, and then using docker-compose to also run those pushed containers as the various services.

Something to watch out for if you use Docker is that you don't have any containers sharing the same internal port. (So don't have two that internally use 8000 for example).

There are some instructions for provisioning an Ubuntu 18.04 ami on AWS with Docker Compose in AWS.md.

At this point you should be able to run a gateway.

Get a terminal running on the machine on which you want to run the gateway for carrying out these next steps.

Write this to a docker-compose.yml file on the machine, replacing james@example.com with an email address that has accepted the Let's Encrypt terms (who will receive any messages from Let's Encrypt) and www.example.localhost with your real domain name.

version: "3"
services:
  gateway:
    restart: unless-stopped
    image: thejimmyg/gateway-lite:0.2.17
    ports:
      - "80:80"
      - "443:443"
    volumes:
      - ./domain:/app/domain
      - ./letsencrypt:/etc/letsencrypt
    environment:
      DEBUG: gateway-lite,express-http-proxy
    command: ["--https-port", "443", "--port", "80", "--cert", "domain/www.example.localhost/sni/cert.pem", "--key", "domain/www.example.localhost/sni/key.pem", "--domain", "domain", "--lets-encrypt", "--email", "james@example.com"]

It is OK to run Docker Compose from your user's home directory for example.

Create a directory for Let's Encrypt that will be mounted into your Docker container. This allows you to keep your certificates between restarts (essential):

mkdir -p letsencrypt

Setup a basic domain structure for your domain:

export DOMAIN=example.com
mkdir -p domain/$DOMAIN
cd domain
mkdir -p $DOMAIN/webroot/.well-known
cat << EOF > $DOMAIN/webroot/.well-known/hello
world!
EOF
mkdir -p $DOMAIN/sni
cd ../
cp -pr $DOMAIN www.$DOMAIN

If you already have certificates, put them in these locations, otherwise Let's Encrypt will create them for you and put them in the right place:

domain/${DOMAIN}/sni/cert.pem
domain/${DOMAIN}/sni/key.pem
domain/www.${DOMAIN}/sni/cert.pem
domain/www.${DOMAIN}/sni/key.pem

You are now ready to go!

Before Let's Encrypt can get certificates, your domain must be publicly accessible on the internet, and connected to the server IP you are about to run.

With your DNS A records in place, run Docker Compose:

docker-compose up

You can add the -d flag to have Docker run everything as a daemon and keep it running, as well as to start up automatically when you reboot.

You'll see this initially as part of the output from the first boot:

gateway_1  | 2018-12-07T15:44:24.857Z gateway-lite Error: ENOENT: no such file or directory, open 'domain/www.example.localhost/sni/key.pem'
gateway_1  |     at Object.openSync (fs.js:436:3)
gateway_1  |     ...

At this point, Gateway Lite should get you a certificate, notice the change and restart, so that everything now works.

curl http://$DOMAIN/.well-known/hello
curl http://www.$DOMAIN/.well-known/hello

In both cases you should see world!.

You can now restart the server in daemon mode. Press Ctrl+C and wait a few seconds to safely stop the server, then run:

docker-compose up -d

Bear in mind that Let's Encrypt operates a rate limit as described here:

https://letsencrypt.org/docs/rate-limits/

This means that you should be careful that everything is correctly configured before applying for a certificate. There is also a staging environment you can use when setting things up. Pass --staging when running Gateway Lite to use the Let's Encrypt staging environment.

Your gateway should restart when new certificates are added and it should automatically renew certificates as long as it is left up and running.

If you want to manually restart everything, in the same directory as your docker-compose.yml file, run this:

docker-compose down
docker-compose up -d

You can view your logs:

docker-compose logs --tail="10" -f

Now you should be able to visit the root of your domain and be correctly redirected to HTTPS which will give you an error that no proxy.json file is yet set up for downstream servers.

From a terminal where you have set up DOMAIN to point to your domain:

curl -v http://$DOMAIN 2>&1 | grep "Redirecting"
curl -v https://$DOMAIN 2>&1 | grep "Redirecting"

Let's add a Docker Registry container for pushing private docker images to, and a simple hello world server both downstream from the gateway. We'll call them registry and hello.

First, edit the docker-compose.yml file to add a links config to the end of the gateway section to points to the two other containers by name:

    links:
      - hello:hello
      - registry:registry

Internally Docker will use this to set up a network so that from within the gateway, the hello will point to the IP of the running hello container and registry will point to the name of the running registry container.

This means that with this configuration if you were able to run curl http://registry:5000/v2/ from the gateway container you'd see the response from the HTTP service running on port 5000 in the registry container.

Next add the sections for the two new services:

  hello:
    restart: unless-stopped
    image: thejimmyg/downstream:latest
    ports:
      - "8000:8000"
  registry:
    image: registry:2.6.2
    restart: unless-stopped
    ports:
      - 5000:5000
    environment:
      REGISTRY_STORAGE_FILESYSTEM_ROOTDIRECTORY: /data
    volumes:
      - ./data:/data

Your docker-compose.yml should now look like this:

version: "3"
services:
  gateway:
    restart: unless-stopped
    image: thejimmyg/gateway-lite:latest
    ports:
      - "80:80"
      - "443:443"
    volumes:
      - ./domain:/app/domain
      - ./letsencrypt:/etc/letsencrypt
    environment:
      DEBUG: gateway-lite,express-http-proxy
    command: ["--https-port", "443", "--port", "80", "--cert", "domain/www.example.localhost/sni/cert.pem", "--key", "domain/www.example.localhost/sni/key.pem", "--domain", "domain", "--lets-encrypt", "--email", "james@example.com"]
    links:
      - hello:hello
      - registry:registry
  hello:
    restart: unless-stopped
    image: thejimmyg/downstream:latest
    ports:
      - "8000:8000"
  registry:
    image: registry:2.6.2
    restart: unless-stopped
    ports:
      - 5000:5000
    environment:
      REGISTRY_STORAGE_FILESYSTEM_ROOTDIRECTORY: /data
    volumes:
      - ./data:/data

Make a data directory for Docker registry:

mkdir data

Now you'll need to tell the gateway-lite server how to proxy to the downstream service. You do this with the domain/$DOMAIN/proxy.json file:

[
  ["/v2/", "registry:5000", {"auth": true}],
  ["/", "hello:8000", {"path": "/"}]
]

See the earlier documentation to understand the format.

To make your server private so that people can't push to Docker Registry you can sign in with the credentials in domain/$DOMAIN/users.json:

{"admin": "secret"}

CAUTION: Use your own username and password, admin and secret are too easy to guess.

Restart docker compose again:

docker-compose down
docker-compose up -d

If you visit / you should see the Hello! page from thejimmyg/downstream:latest:

curl https://www.$DOMAIN

Gives:

Hello!

/

Now, to use the Docker Registry you'll need to sign in with the credentials you set up. Visit /v2/ and you should see {}.

curl -v -u admin:secret https://$DOMAIN/v2/

You'll need to close your browser or clear your cache to sign out since this only uses Basic Auth.

From another machine you should be able to sign in to your registry:

docker login $DOMAIN

Once signed in, you should be able to push and pull images. For example:

docker build . -t docker.jimmyg.org/gateway-lite:latest
docker push docker.jimmyg.org/gateway-lite:latest

When you are deploying docker images that you pushed to your own private repo, you'll need to explicitly pull them with docker pull before restarting the server with Docker Compose because can't pull from the registry automatically if the registry itself isn't running.

Development

export DOMAIN=www.example.localhost
mkdir -p domain/$DOMAIN/sni/
openssl req -x509 -out domain/$DOMAIN/sni/cert.pem -keyout domain/$DOMAIN/sni/key.pem \
  -newkey rsa:2048 -nodes -sha256 \
  -subj "/CN=$DOMAIN" -extensions EXT -config <( \
   printf "[dn]\nCN=$DOMAIN\n[req]\ndistinguished_name = dn\n[EXT]\nsubjectAltName=DNS:$DOMAIN\nkeyUsage=digitalSignature\nextendedKeyUsage=serverAuth")

Repeat this for:

export DOMAIN=example.localhost

Then add example.localhost and www.example.localhost to /etc/hosts under 127.0.0.1.

Now you need to trust the certificate which you can do on most operating systems by double cliking the cert.pem file. On macOS you can add it to your login keychain. Just to be safe, best not to distribute it though once your browser has trusted it as others could use it.

curl doesn't use system certifcates on macOS, but use -k to ignore security problems when testing locally.

See:

https://tosbourn.com/getting-os-x-to-trust-self-signed-ssl-certificates/

Tip

You can also specify the redirects, users and proxy settings for each domain on the command line in YAML or JSON in your docker-compose.yml file. For example, you could add this to the existing command: section:

      --redirect '
        www.example.localhost:
          "/some": "/other"
      '
      --proxy '
        www.example.localhost:
          - ["/user", "signin/user", {}]
          - ["/", "markdown"]
      '
      --user '
        www.example.localhost:
          admin: "supersecret"
      '

Changelog

0.2.17 2019-03-24

Added an authExceptOptions setting as well as auth as a possible option in the proxy configuration. They are the same except authExceptOptions doesn't require authorization for OPTIONS requests and will just proxy them directly. This is handy if there is a CORS backend that needs to respond to an OPTIONS pre-flight request before authorization credentials can be passed.

0.2.16 2019-03-22

Automatically copy renewed certificates into the domain sni directory
Automatically exit after certificate renewal so that new certificates can be loaded
Upgraded js-yaml for to fix security audit
Removed nodemailer as it isn't used
Created new install-certificates script which takes the domain directory as its argument and installs the latest certificates from the existing Lets Encrypt directory from /etc/letsencrypt into the domain directory. Use like this:
```
DEBUG=gateway-lite node bin/install-certificates.js domain
```
Exit after renewing certificates (assumes that the process will be automatically restarted to load the new certificates.

0.2.15 2019-02-15

Refactored PWA functionality into pjax-pwa-overlay

0.2.13 2019-01-18

Upgraded for express-mustache-overlays 0.4.0

0.2.12 2019-01-12

Use the same PWA environment variables as express-mustache-overlays as defaults

0.2.11 2019-01-12

Progressive web app support

0.2.10 2019-01-10

Added express-http-proxy back in to support both cascade behaviour or web socket proxying, but not both for the same path at the same time

0.2.9 2019-01-10

Added the gateway-lite bin script, and added #!/usr/bin/env node to the top of bin/gateway-lite.js
Removed the limit and cascade options
Support websocket proxying
Switched express-http-proxy for http-proxy-middleware
Fixed a bug with unknown usernames

0.2.8 2019-01-03

Updated the README with --proxy and --user example
Added 405 and 504 HTTP JSON responses to handle ECONNRESET and ECONNREFUSED errors respectively
Updated AWS.md with information about setting up swap space and pruning Docker
Refactored auth handling so that user names are case insensitive, and passwords longer than 64 characters are treated as hashes as generated and used by express-mustache-jwt-signin

0.2.7 2019-01-02

Support the cascade argument to the proxy args which, when set to true will act if the path was not present if it returns a 404, and will instead try subsequent routes
Simple 404 and 500 error logging
Respond to SIGTERM as well as SIGNINT
Upgrade docker-compose.yml to use thejimmyg/express-downstream:0.1.4
Added YAML command line config example to the docs
Removed bin/downstream.js now that there is express-downstream

0.2.6 2018-12-30

Correctly process YAML specified for the --user flag

0.2.5 2018-12-19

Support YAML for all the files, not just JSON
Changed the default EXPOSE ports in Docker to 80 and 443
Removed DEFAULT_DOMAIN from Dockerfile

0.2.4 2018-12-16

Removed nodemon
Made lets encrypt code more reliable by making directories

0.2.3 2018-12-15

Proxy paths are now part of the downstream argument, not an option
Added --redirect, --proxy, --user arguments (which apply after the file corresponding files are loaded
Using dashdash instead of commander
Removed support for dhparams
Now need --lets-encrypt option to enable the Let's Encrypt support
Moved downstream out to the express-downstream package

0.2.2 2018-12-11

Allow fetched HTTPS certifcates to be used without restarting

0.2.1 2018-12-10

Certbot certificate renews built in
Don't crash on invalid hostname

0.2.0 2018-12-07

Per-downstream server auth, limit and path options
Full Docker and Certbot tutorial

0.1.0 2018-12-04

First version

Release

Instructions started in RELEASE.md.

gateway-lite

Gateway Lite

Set up a testing certificate

Install and Run

Docker Compose and Certbot

Development

Tip

Changelog

0.2.17 2019-03-24

0.2.16 2019-03-22

0.2.15 2019-02-15

0.2.13 2019-01-18

0.2.12 2019-01-12

0.2.11 2019-01-12

0.2.10 2019-01-10

0.2.9 2019-01-10

0.2.8 2019-01-03

0.2.7 2019-01-02

0.2.6 2018-12-30

0.2.5 2018-12-19

0.2.4 2018-12-16

0.2.3 2018-12-15

0.2.2 2018-12-11

0.2.1 2018-12-10

0.2.0 2018-12-07

0.1.0 2018-12-04

Release

Readme

Keywords

Package Sidebar

Install

Repository

Homepage

Weekly Downloads

Version

License

Unpacked Size

Total Files

Last publish

Collaborators

gateway-lite

Gateway Lite

Set up a testing certificate

Install and Run

Docker Compose and Certbot

Development

Tip

Changelog

0.2.17 2019-03-24

0.2.16 2019-03-22

0.2.15 2019-02-15

0.2.13 2019-01-18

0.2.12 2019-01-12

0.2.11 2019-01-12

0.2.10 2019-01-10

0.2.9 2019-01-10

0.2.8 2019-01-03

0.2.7 2019-01-02

0.2.6 2018-12-30

0.2.5 2018-12-19

0.2.4 2018-12-16

0.2.3 2018-12-15

0.2.2 2018-12-11

0.2.1 2018-12-10

0.2.0 2018-12-07

0.1.0 2018-12-04

Release

Readme

Keywords

Package Sidebar

Install

Repository

Homepage

DownloadsWeekly Downloads

Version

License

Unpacked Size

Total Files

Last publish

Collaborators

Weekly Downloads