tiny-sprintf

0.3.0 • Public • Published

tiny-sprintf

Tiny but complete.

  • Implements sprintf based on the php doc. They have some nice examples.
  • Supports the same type conversions as php now.
  • Min build (only s) is 519B minified, full build (all of php) is 989B minified, bare build is 422B (only s, not extendable).
  • You can now make custom builds with Grunt, choosing what type conversions to include.

Table of contents

Install

npm install tiny-sprintf

Then, in nodejs:

var sprintf = require('tiny-sprintf');

Builds

The repo provides several builds that are updated with each release. They are found in the folder dist. Each build will have a develop and minified version.

Currently, the collection consists of:

  • sprintf
    • Type conversions: s
    • Extendible (type conversions can be added at runtime)
    • Useful for small builds with custom type conversions
    • Paths:
      • (2358B) require("tiny-sprintf/dist/sprintf") same as require("tiny-sprintf")
      • (519B) require("tiny-sprintf/dist/sprintf.min")
  • sprintf.all
    • Type conversions: bcdeEfFgGosxX
    • Extendible (type conversions can be added at runtime)
    • For when you want all options and do not care about file size
    • Paths:
      • (4426B) require("tiny-sprintf/dist/sprintf.all")
      • (989B) require("tiny-sprintf/dist/sprintf.all.min")
  • sprintf.bare
    • Type conversions: s
    • Not extendible
    • For when you only want the string formatting features, not the type conversions
    • Paths:
      • (1975B) require("tiny-sprintf/dist/sprintf.bare")
      • (422B) require("tiny-sprintf/dist/sprintf.bare.min")

Custom builds are possible, read 'Custom build' below.

What does it do

It makes it easy to create monospace text with indenting and alignment.

Stuff like this:

   name  type        description
   ===== =========== ========================
   a     value...... contains nothing
   ab    property... is important
   abc   method..... deprecated
   test  method..... unused
   toolo method..... too long
   metho method..... method with cut off name

Possible with this (for the values of each line):

sprintf("  %-5.5s %-'.-11.11s %-25.25s", name, type, description);

So if you want that stuff in the console or anywhere in your application, you can use sprintf.

Introduction

The sprintf method will receive a string containing sprintf tokens, and any additional arguments you wish to insert at the place of the tokens. Which argument is used depends on the order of arguments vs the order of valid tokens. By default, the first token will get argument 1, the second token argument 2 etc. If you explicitly request an argument using the index$ notation (see 'Format elements' below), it is still counted as a valid token for what the argument selection is concerned.

The full token format (where [] means optional element) is:

"%[+][index$]['padchar][-][minWidth][.maxWidth]type"

The simplest and most straightforward token is "%s", as it inputs whatever argument at that place in the text.

Examples:

sprintf("Place %s into %s", {}, "trash"); // "Place [object Object] into trash"
sprintf("Place %2$s into %1$s", {}, "trash"); // "Place trash into [object Object]"
sprintf("%1$s, %2$s, %2$s, %1$s!", 'left', 'right'); // 'left, right, right, left!'

Formatting with minWidth and maxWidth edits the value, which is the result of typecasting the selected argument to string, right before it is inserted in the text. minWidth fills up the value with padchars until it is at least as long as minWidth dictates. maxWidth will cut off any part of the value that is too large.

Whether this appending or cutting happens on the left or the right of the value, depends on the -: default is left, which gives you a 'right align' effect. Adding the - will cause manipulations on the right, which gives you a 'left align' effect.

Examples:

// Extend length
sprintf("%5s", 'a'); // '    a'
sprintf("%5s", 'abcdefg'); // 'abcdefg'
sprintf("%-5s", 'a'); // 'a    '
sprintf("%-5s", 'abcdefg'); // 'abcdefg'
 
// Limit length
sprintf("%.5s", 'abcdefg'); // 'cdefg'
sprintf("%-.5s", 'abcdefg'); // 'abcde'
 
// Force exact size
sprintf("%5.5s", 'abc'); // '  abc'
sprintf("%5.5s", 'abcdefg'); // 'cdefg'
sprintf("%-5.5s", 'abc'); // 'abc  '
sprintf("%-5.5s", 'abcdefg'); // 'abcde'
 
// Use pad chars
sprintf("%04s", 10); // "0010"
sprintf("%'#4s", 10); // "##10"

Format elements

"%[+][index$]['padchar][-][minWidth][.maxWidth]type"
  1. %
    • defines the start of a substring to interpret.
  2. +
    • if type is d and positive, prepend value with a + character. Not implemented by default.
  3. index$
    • where index is an integer.
    • Points to argument to use as value.
    • Default is using an index, starting at 1, that is incremented with each replace done.
    • Note: 0$ will point to the string to replace, and you probably don't want that.
  4. 'padchar
    • where padchar is a single character of any kind.
    • It must be preceded by a single quote (').
    • Default is " "
    • Note: define your string with double qoutes and everything will be fine. If padchar is zero (0), you can leave out the quote.
  5. -
    • If added, the value gets left aligned.
    • Default is is right aligned.
    • Note: only makes sense with minWidth or maxWidth defined.
  6. minWidth
    • where minWidth is an integer.
    • If the value (see index$) in string form is shorter than this, the rest gets filled up with the padchar. It's added on the left or right of value, depending on the alignment setting (see -).
  7. .maxWidth
    • where maxWidth is an integer.
    • If the value with padding is longer than this value, it gets cut off. Alignment is the same as with minWidth.
  8. type
    • where type is a string s or whatever of the full collection of type conversions was included in the build (see type conversions below).
    • Does typecasting on the value before it is converted to string. Most of the times, you will probably just want to use s

type conversions

Each type conversion does something to the value it is given. If a character sequence is formatted as a sprintf token but its character does not yield a type conversion method (or result), the character sequence is 'escaped' instead. Which means, one % is removed.

Examples:

// Type casting...
sprintf('%s', 10); // '10'
sprintf('%s', 'abc'); // 'abc'
sprintf('%d', 12); // '12'
sprintf('%d', 'abc'); // 'NaN'
 
// Escape anything else
sprintf('%%', 1); // '%'
sprintf('%T', 'abc'); // 'T'

Explanation of type conversions:

  • b
    • typecast to number, then convert to binary string
    • Example: 42 becomes "101010"
    • Uses Number.prototype.toString(2)
    • Using caps (B) does not work.
  • c
    • typecast to number, then convert to ASCII equivalent char.
    • Example: 88 becomes "X" (see ASCII table dec to char)
    • Uses String.fromCharCode()
    • Using caps (C) does not work.
  • d
    • typecast to number
    • Example: "abc" becomes "NaN"
    • Using caps (D) does not work.
  • e
    • typecast to number, then convert to scientific format.
    • Example: 10000 becomes "1e+4"
    • Uses Number.prototype.toExponential()
    • Using caps (E) will turn the e in the string to E
  • f
    • typecast to number, then use a locale-sensitive notation.
    • Example: 1234567.89 may turn into "1.234.567,89" depending on where and what runs the javascript. Node does not seem to do anything special.
    • Uses Number.prototype.toLocaleString()
    • Using caps (F) will do the same.
  • g
    • checks which between e and f which conversion yields the shortest string, and outputs that string. When equal in length, f is favored.
    • Example: 100000000 is shorter as "1e+8", but 100000001 is not and (maybe) becomes "100,000,001".
    • Using caps (G) will use E and F instead.
  • o
    • typecast to number, then convert to octal number.
    • Example: 64 becomes "100".
    • Uses Number.prototype.toString(8)
    • Using caps (O) will not work.
  • s
    • typecast to string.
    • Note: considering the output of sprintf is a string, this essentially applies to every value.
    • Using caps (S) will not work.
  • x
    • typecast to number, then convert to hexadecimal number.
    • Example: 255 becomes "ff"
    • Uses Number.prototype.toString(16)
    • Using caps (X) will turn any letters in the string to upper case ("ff" becomes "FF").

Adding conversion types

Punch functions into the sprintf function under the same property as the type character. Lowercase characters only, which will receive both lower- and uppercase. Expect args value, caps, plusChar and return the value in the desired format, or undefined to reject. You don't have to convert the value to string (unless it is undefined).

Arguments:

  • {*} value - the value for the match, which is an argument passed to sprintf
  • {Boolean} caps - whether or not the type character is in caps (/[A-Z]/)
  • {String|undefined} plusChar - the plus character, or undefined

Return:

  • {*|undefined} - if anything else but undefined, the match is accepted and the value is sprintf formatted. If undefined, the match is rejected, and escaped like any other 'invalid' character.

For example, the method of d (typecast to Number, add plus if desired, rejects caps) is:

sprintf.d = function(value, caps, plusChar) {
    return caps ? undefined : (plusChar || '') + (+value);
};

Grunt tasks

Enter the sprintf directory, run npm install. Make sure you have Grunt installed (globally: npm install -g grunt-cli). Run grunt for a quick overview.

Custom build

Use grunt build to create a custom build. You can define a subset of the available types, or (re)build the bare build if you made changes to the source code.

Full format (where [] means optional):

grunt build[:types][:destPath][:doMinify]

Optional arguments:

  • types
    • String, containig every character of the type conversions to include, or the string sequence "bare".
    • Note: "bare" will trigger the bare build, which contains only s.
  • destPath
    • String, containing destination dir and, optionally, file name.
    • Defaults to ./dist/sprintf.custom.js
    • Note: if destPath is a dir, the filename sprintf.custom.js will be used
  • doMinify
    • String, where (case-insensitive) "false", "0" and "no" means false. Everything else means true, and will cause the build to be minified.
    • Default is true.
    • Note: aside from using uglify2, it also does some 'pre-mangle' optimizations. Although effective, they do assume u and A to Z are not used as global vars. In return, commonly occurring large property or method names are automatically swapped with vars, notably shrinking the minified build. I am not aware of any uglify2 solution to do this.

Run tests

Run grunt nodeunit or npm test. Watch the results.

Readme

Keywords

Package Sidebar

Install

npm i tiny-sprintf

Weekly Downloads

1,478

Version

0.3.0

License

ISC

Last publish

Collaborators

  • nickyout