Important Note

Now, that webpack 5 planning to support caching out-of-the-box, AutoDllPlugin will soon be obsolete.

In the meantime, I would like to recommend Michael Goddard's hard-source-webpack-plugin,
which seems like webpack 5 is going to use internally.

AutoDllPlugin

Webpack's DllPlugin without the boilerplate

webpack 4

  npm install --save-dev autodll-webpack-plugin

webpack 2 / 3

  npm install --save-dev autodll-webpack-plugin@0.3

Introduction
Options
FAQ
Examples

Introduction

Webpack's own DllPlugin it great, it can drastically reduce the amount of time needed to build (and rebuild) your bundles by reducing the amount of work needs to be done.

If you think about it, most of the code in your bundles come from NPM modules that you're rarely going to touch. You know that, but Webpack doesn't. So every time it compiles it has to analyze and build them too - and that takes time.

The DllPlugin allows you to to create a separate bundle in advance for all of those modules, and teach Webpack to reference them to that bundle instead.

That leads to a dramatic reduction in the amount of time takes Webpack to build your bundles.

For example, these are the measurements for the performance test that you can find in the examples folder:

	Without DllPlugin	With DllPlugin
Build Time	16461ms - 17310ms	2991ms - 3505ms
DevServer Rebuild	2924ms - 2997ms	316ms - 369ms

The DllPlugin sounds great! So why AutoDllPlugin?

While the DllPlugin has many advantages, it's main drawback is that it requires a lot of boilerplate.

AutoDllPlugin serves as a high-level plugin for both the DllPlugin and the DllReferencePlugin, and hides away most of their complexity.

When you build your bundle for the first time, the AutoDllPlugin Compiles the DLL for you, and references all the specified modules from your bundle to the DLL.

The next time you compile your code, AutoDllPlugin will skip the build and read from the cache instead.

AutoDllPlugin will rebuild your DLLs every time you change the Plugin's configuration, install or remove a node module.

When using Webpack's Dev Server, the bundle are loaded into the memory preventing unnecessary reads from the FileSystem.

With the way the DLLPlugin works, you must load the DLL bundles before your own bundle. This is commonly accomplished by adding an additional script tag to the HTML.

Because that is such a common task, AutoDllPlugin can do this for you (in conjunction with the HtmlPlugin ).

plugins: [
  new HtmlWebpackPlugin({
    inject: true,
    template: './src/index.html',
  }),
  new AutoDllPlugin({
    inject: true, // will inject the DLL bundles to index.html
    filename: '[name].js',
    entry: {
      vendor: [
        'react',
        'react-dom'
      ]
    }
  })
]

Will Result in:

<!DOCTYPE html>
<html lang="en">
<head>
  <meta charset="UTF-8">
  <title>Test</title>
</head>
<body>

  ...

  <script src="dist/vendor.dll.js"></script>
  <script src="dist/main.bundle.js"></script>
</body>
</html>

Basic Usage (example):

const path = require('path');
const AutoDllPlugin = require('autodll-webpack-plugin');

module.exports = {
  entry: {
    app: './src/index.js'
  },

  output: {
    filename: '[name].bundle.js',
    path: path.resolve(__dirname, 'dist')
    publicPath: '/'
  },

  plugins: [
    new AutoDllPlugin({
      filename: '[name].dll.js',
      entry: {
        vendor: [
          'react',
          'react-dom'
        ]
      }
    })
  ]
};

Recommended Usage (example):

While it's not required, using AutoDllPlugin together with HtmlWebpackPlugin is highly recommended, because its saves you the trouble of manually adding the DLL bundles to the HTML by yourself.

Use AutoDllPlugin's inject option to enable this feature.

const path = require('path');
const AutoDllPlugin = require('autodll-webpack-plugin');
const HtmlWebpackPlugin = require('html-webpack-plugin');

module.exports = {
  entry: './src/index.js',

  output: {
    filename: '[name].bundle.js',
    path: path.resolve(__dirname, 'dist'),
    publicPath: '/'
  },

  plugins: [
    new HtmlWebpackPlugin({
      inject: true, // will inject the main bundle to index.html
      template: './src/index.html',
    }),
    new AutoDllPlugin({
      inject: true, // will inject the DLL bundle to index.html
      debug: true,
      filename: '[name]_[hash].js',
      path: './dll',
      entry: {
        vendor: [
          'react',
          'react-dom'
        ]
      }
    })
  ]
};

Options

Option	Type	Default	Description
entry	Object	`{}`	The entry points for the DLL's. Think of it as the entry option in your webpack config. Each entry point represents a DLL bundle and expects an array of modules. entry: { // Create a DLL from NPM modules: vendor: [ 'react', 'react-dom', 'moment', 'lodash' ], // Create a DLL from a part of your app // that you rarely change: admin: [ './src/admin/index.js' ] }
filename	String	`"[name].js"`	The filename template. Same as webpack's output.filename. Examples: `[name]_[hash].dll.js` `[id].bundle.js`
context	String	`process.cwd()`	The base directory, an absolute path, for resolving entry points and loaders from the configuration. Same as webpack's context It is very important to make sure the context is set correctly, otherwise, you'll end up with having the same modules both in the DLL bundles and in your main bundles! Most of the time, the defaults (the current directory) should work for you, here's how it should work: If your webpack config is stored at the base of your project: ~/my-project/webpack.config.js Set it up like this: { context: __dirname } If your webpack config is stored in a nested directory: ~/my-project/config/webpack.config.js It should look like this: { context: path.join(__dirname, '..') }
inject	Boolean	`false`	By setting inject to true, AutoDLL will inject the DLL bundles into the HTML for you. Note: HtmlWebpackPlugin is required for this feature to work.
path	String	`""`	The path for the DLL bundles, relative to webpack's output.publicPath
debug	Boolean	`false`	Use debug mode to see more clearly what AutoDLL is doing.
plugins	Array	`[]`	Plugins for the DLL compiler. Same as webpack's plugins. plugins: [ new webpack.optimize.UglifyJsPlugin() ]
inherit	Boolean/Function	`false`	Inherit from the parent config. A valid use-case would be if you have `devtool: "source-maps"` in your webpack config and wanted source maps to be created for the DLL bundle as well. However, this does not inherit plugins from the parent config and inheriting loaders are buggy too(see #37). It can also be a function to inherit only the desired properties. function inherit(webpackConfig) { // Return object with desired properties. } To see it action, check out the example. ⚠️ This option is highly experimental! Use with caution and if you face any problems, please open a issue.

FAQ

I added my dependencies to the DLL, and now, when I make a change to one of them I don't see it! Why?

When you run webpack for the first time, AutoDLL builds the DLL bundles and stores them in the cache for next time.

That leads to faster builds and rebuilds (using webpack's dev server).

There are two conditions for triggering a new build on the next run:

Running npm install / remove / update package-name (or Yarn equivalent).
Changing the plugin's configurations.

For performance considerations, AutoDLL is not aware of any changes made to module's files themselves.

So as long as you intend to work on a module, just exclude it from the DLL.

For example, let's say you configured the plugin like so:

new AutoDllPlugin({
  entry: {
    vendor: [
      'react',
      'react-dom',
      'lodash'
    ]
  }
})

And then, while working on your project, you encountered some weird behavior with lodash and decided to put a console.log statement in one of its files to see how it behaves.

As explained above, AutoDLL is not going to invalidate its cache in this case, and you might get surprised that you don't see the changes.

To fix that, all you have to do is comment out lodash from the DLL, and uncomment it when you're done.

new AutoDllPlugin({
  entry: {
    vendor: [
      'react',
      'react-dom'
     // 'lodash'
    ]
  }
})

The modules I added to the DLL are duplicated! They included both in the DLL bundle AND the main bundle.

That is most likely caused by using an incorrect context.

AutoDLL will try its best to set the context for you, but as with webpack's own context property, sometimes it is better to do it manually.

The context property should be an absolute path, pointing the base of your project.

For example, let's consider a project structured like so:

my-project
├── node_modules
│   └── react
│   └── react-dom
├── src
│   └── index.js
│   └── module.js
├── webpack.config.js
└── package.json

Then, inside webpack.config.js, You'll setup the context like so:

__dirname;   // '/Users/username/my-project'

...

new AutoDllPlugin({
  context: __dirname,
  entry: {
    vendor: [
      'react',
      'react-dom'
    ]
  }
})

Note that the __dirname variable is node's way to get the absolute path of the current module's directly, which is exactly what we need because webpack.config.js stored in the base of our project.

On the other hand, let's say your project is structured like so:

my-project
├── node_modules
│   └── react
│   └── react-dom
├── src
│   └── index.js
│   └── module.js
├── config
│   └── webpack.config.js
└── package.json

Notice that now our config is no longer stored at the base of our project, but in a subdirectory of its own.
That means that now we have to subtract the relative path to our config file from __dirname.

We can use node's path module to help us with that:

var path = require('path');

__dirname;                   // '/Users/username/my-project/config'
path.join(__dirname, '..');  // '/Users/username/my-project'

...

new AutoDllPlugin({
  context: path.join(__dirname, '..'),
  entry: {
    vendor: [
      'react',
      'react-dom'
    ]
  }
})

If you still encounter an issue with the context set up correctly, please open an issue. I'll be happy to help you.

Running Examples

git clone git@github.com:asfktz/autodll-webpack-plugin.git
cd autodll-webpack-plugin
npm install
npm run build
cd examples/recommended
npm install
npm start or npm run build

Contributors

_{Asaf Katz} 💻 👀 ⚠️ 🚇	_{Suhas Karanth} 💻 🤔 🐛 🚇 ⚠️ 🔧 💬	_{Matt Heise} 💻	_{James Gillmore} 💻	_{Jonas Pauthier} 🤔 🔧 💬 📖 🐛	_{Ade Viankakrisna Fadlil} 💻 🐛 🔧 💬	_{Tryggvi Gylfason} 💻 💬 🐛
_{Drew Hamlett} 💻	_{Joshua Wiens} 📖 💬	_{Daniel Tschinder} 💻	_{Amila Welihinda} 📖

This project follows the all-contributors specification. Contributions of any kind welcome!

Special thanks to all the contributors over the time. Every one of you made an impact ❤️

wind-autodll-webpack-plugin

Important Note

AutoDllPlugin

Table of contents

Introduction

The DllPlugin sounds great! So why AutoDllPlugin?

Basic Usage (example):

Recommended Usage (example):

Options

FAQ

I added my dependencies to the DLL, and now, when I make a change to one of them I don't see it! Why?

The modules I added to the DLL are duplicated! They included both in the DLL bundle AND the main bundle.

Running Examples

Contributors

Readme

Keywords

Package Sidebar

Install

Repository

Homepage

Weekly Downloads

Version

License

Unpacked Size

Total Files

Last publish

Collaborators

wind-autodll-webpack-plugin

Important Note

AutoDllPlugin

Table of contents

Introduction

The DllPlugin sounds great! So why AutoDllPlugin?

Basic Usage (example):

Recommended Usage (example):

Options

FAQ

I added my dependencies to the DLL, and now, when I make a change to one of them I don't see it! Why?

The modules I added to the DLL are duplicated! They included both in the DLL bundle AND the main bundle.

Running Examples

Contributors

Readme

Keywords

Package Sidebar

Install

Repository

Homepage

DownloadsWeekly Downloads

Version

License

Unpacked Size

Total Files

Last publish

Collaborators

Weekly Downloads