balance-transfer

Balance transfer

A sample Node.js app to demonstrate fabric-client & fabric-ca-client Node.js SDK APIs

Prerequisites and setup:

• Docker - v1.12 or higher
• Docker Compose - v1.8 or higher
• Git client - needed for clone commands
• Node.js v8.4.0 or higher
• Download Docker images

cd fabric-samples/balance-transfer/

Once you have completed the above setup, you will have provisioned a local network with the following docker container configuration:

• 2 CAs
• A SOLO orderer
• 4 peers (2 peers per Org)

Artifacts

• Crypto material has been generated using the cryptogen tool from Hyperledger Fabric and mounted to all peers, the orderering node and CA containers. More details regarding the cryptogen tool are available here.
• An Orderer genesis block (genesis.block) and channel configuration transaction (mychannel.tx) has been pre generated using the configtxgen tool from Hyperledger Fabric and placed within the artifacts folder. More details regarding the configtxgen tool are available here.

Running the sample program

There are two options available for running the balance-transfer sample For each of these options, you may choose to run with chaincode written in golang or in node.js.

Option 1:

Terminal Window 1

• Launch the network using docker-compose

docker-compose -f artifacts/docker-compose.yaml up

Terminal Window 2

• Install the fabric-client and fabric-ca-client node modules

npm install

• Start the node app on PORT 4000

PORT=4000 node app

Terminal Window 3

• Execute the REST APIs from the section Sample REST APIs Requests

Option 2:

Terminal Window 1

cd fabric-samples/balance-transfer

./runApp.sh

• This launches the required network on your local machine
• Installs the fabric-client and fabric-ca-client node modules
• And, starts the node app on PORT 4000

Terminal Window 2

In order for the following shell script to properly parse the JSON, you must install jq:

instructions https://stedolan.github.io/jq/

With the application started in terminal 1, next, test the APIs by executing the script - testAPIs.sh:

cd fabric-samples/balance-transfer

## To use golang chaincode execute the following command

./testAPIs.sh -l golang

## OR use node.js chaincode

./testAPIs.sh -l node

Sample REST APIs Requests

Login Request

• Register and enroll new users in Organization - Org1:

curl -s -X POST http://localhost:4000/users -H "content-type: application/x-www-form-urlencoded" -d 'username=Jim&orgName=Org1'

OUTPUT:

{
  "success": true,
  "secret": "RaxhMgevgJcm",
  "message": "Jim enrolled Successfully",
  "token": "<put JSON Web Token here>"
}

The response contains the success/failure status, an enrollment Secret and a JSON Web Token (JWT) that is a required string in the Request Headers for subsequent requests.

Create Channel request

curl -s -X POST \
  http://localhost:4000/channels \
  -H "authorization: Bearer <put JSON Web Token here>" \
  -H "content-type: application/json" \
  -d '{
    "channelName":"mychannel",
    "channelConfigPath":"../artifacts/channel/mychannel.tx"
}'

Please note that the Header authorization must contain the JWT returned from the POST /users call

Join Channel request

curl -s -X POST \
  http://localhost:4000/channels/mychannel/peers \
  -H "authorization: Bearer <put JSON Web Token here>" \
  -H "content-type: application/json" \
  -d '{
    "peers": ["peer0.org1.example.com","peer1.org1.example.com"]
}'

Install chaincode

curl -s -X POST \
  http://localhost:4000/chaincodes \
  -H "authorization: Bearer <put JSON Web Token here>" \
  -H "content-type: application/json" \
  -d '{
    "peers": ["peer0.org1.example.com","peer1.org1.example.com"],
    "chaincodeName":"mycc",
    "chaincodePath":"github.com/example_cc/go",
    "chaincodeType": "golang",
    "chaincodeVersion":"v0"
}'

NOTE: chaincodeType must be set to node when node.js chaincode is used and chaincodePath must be set to the location of the node.js chaincode. Also put in the $PWD

ex:
curl -s -X POST \
  http://localhost:4000/chaincodes \
  -H "authorization: Bearer <put JSON Web Token here>" \
  -H "content-type: application/json" \
  -d '{
    "peers": ["peer0.org1.example.com","peer1.org1.example.com"],
    "chaincodeName":"mycc",
    "chaincodePath":"$PWD/artifacts/src/github.com/example_cc/node",
    "chaincodeType": "node",
    "chaincodeVersion":"v0"
}'

Instantiate chaincode

This is the endorsement policy defined during instantiation. This policy can be fulfilled when members from both orgs sign the transaction proposal.

{
    identities: [{
            role: {
                name: 'member',
                mspId: 'Org1MSP'
            }
        },
        {
            role: {
                name: 'member',
                mspId: 'Org2MSP'
            }
        }
    ],
    policy: {
        '2-of': [{
            'signed-by': 0
        }, {
            'signed-by': 1
        }]
    }
}

curl -s -X POST \
  http://localhost:4000/channels/mychannel/chaincodes \
  -H "authorization: Bearer <put JSON Web Token here>" \
  -H "content-type: application/json" \
  -d '{
    "chaincodeName":"mycc",
    "chaincodeVersion":"v0",
    "chaincodeType": "golang",
    "args":["a","100","b","200"]
}'

NOTE: chaincodeType must be set to node when node.js chaincode is used

Invoke request

This invoke request is signed by peers from both orgs, org1 & org2.

curl -s -X POST \
  http://localhost:4000/channels/mychannel/chaincodes/mycc \
  -H "authorization: Bearer <put JSON Web Token here>" \
  -H "content-type: application/json" \
  -d '{
    "peers": ["peer0.org1.example.com","peer0.org2.example.com"],
    "fcn":"move",
    "args":["a","b","10"]
}'

NOTE: Ensure that you save the Transaction ID from the response in order to pass this string in the subsequent query transactions.

Chaincode Query

curl -s -X GET \
  "http://localhost:4000/channels/mychannel/chaincodes/mycc?peer=peer0.org1.example.com&fcn=query&args=%5B%22a%22%5D" \
  -H "authorization: Bearer <put JSON Web Token here>" \
  -H "content-type: application/json"

Query Block by BlockNumber

curl -s -X GET \
  "http://localhost:4000/channels/mychannel/blocks/1?peer=peer0.org1.example.com" \
  -H "authorization: Bearer <put JSON Web Token here>" \
  -H "content-type: application/json"

Query Transaction by TransactionID

curl -s -X GET http://localhost:4000/channels/mychannel/transactions/<put transaction id here>?peer=peer0.org1.example.com \
  -H "authorization: Bearer <put JSON Web Token here>" \
  -H "content-type: application/json"

NOTE: The transaction id can be from any previous invoke transaction, see results of the invoke request, will look something like 8a95b1794cb17e7772164c3f1292f8410fcfdc1943955a35c9764a21fcd1d1b3.

Query ChainInfo

curl -s -X GET \
  "http://localhost:4000/channels/mychannel?peer=peer0.org1.example.com" \
  -H "authorization: Bearer <put JSON Web Token here>" \
  -H "content-type: application/json"

Query Installed chaincodes

curl -s -X GET \
  "http://localhost:4000/chaincodes?peer=peer0.org1.example.com&type=installed" \
  -H "authorization: Bearer <put JSON Web Token here>" \
  -H "content-type: application/json"

Query Instantiated chaincodes

curl -s -X GET \
  "http://localhost:4000/chaincodes?peer=peer0.org1.example.com&type=instantiated" \
  -H "authorization: Bearer <put JSON Web Token here>" \
  -H "content-type: application/json"

Query Channels

curl -s -X GET \
  "http://localhost:4000/channels?peer=peer0.org1.example.com" \
  -H "authorization: Bearer <put JSON Web Token here>" \
  -H "content-type: application/json"

Clean the network

The network will still be running at this point. Before starting the network manually again, here are the commands which cleans the containers and artifacts.

docker rm -f $(docker ps -aq)
docker rmi -f $(docker images | grep dev | awk '{print $3}')
rm -rf fabric-client-kv-org[1-2]

Network configuration considerations

You have the ability to change configuration parameters by either directly editing the network-config.yaml file or provide an additional file for an alternative target network. The app uses an optional environment variable "TARGET_NETWORK" to control the configuration files to use. For example, if you deployed the target network on Amazon Web Services EC2, you can add a file "network-config-aws.yaml", and set the "TARGET_NETWORK" environment to 'aws'. The app will pick up the settings inside the "network-config-aws.yaml" file.

IP Address** and PORT information

If you choose to customize your docker-compose yaml file by hardcoding IP Addresses and PORT information for your peers and orderer, then you MUST also add the identical values into the network-config.yaml file. The url and eventUrl settings will need to be adjusted to match your docker-compose yaml file.

peer1.org1.example.com:
  url: grpcs://x.x.x.x:7056
  eventUrl: grpcs://x.x.x.x:7058

Discover IP Address

To retrieve the IP Address for one of your network entities, issue the following command:

# this will return the IP Address for peer0
docker inspect peer0 | grep IPAddress

This work is licensed under a Creative Commons Attribution 4.0 International License.