iobroker.kecontact

2.2.0 • Public • Published

Logo

ioBroker.kecontact

NPM version Downloads Number of Installations (latest) Number of Installations (stable) Dependency Status

NPM Translation status

Tests: Test and Release

ioBroker adapter for KEBA KeContact P20 or P30 and BMW i wallbox

Control your charging station using its UDP protocol and use automatic regulation e.g. to charge your vehicle by photovoltaic surplus and battery storage.

Install

Install this adapter via ioBroker Admin:

  1. Open instance config dialog
  2. Enter the IP address of your KEBA KeContact wallbox
  3. Enter states of energy meters for PV autoamtics or power limitation and desired data for battery storage
  4. Save the configuration
  5. Start the adapter

Configuration

KeContact IP Address

This is the IP address of your KEBA KeContact or BMW i wallbox. Combination with Keba KeContact S10 (phase switching device) is supported.

Firmware check

No longer supported since webite of Keba was changed.

Passive Mode

Activate this option if you wnat to control your wallbox by your own and yu do not wish this adapter to do some automatics. In this case all subsequent options regarding PV automatics and power limitation will be ignored.

Subsequent wallbox

Activate this option if this a subsequent wallbox in your environment. Currently, only one wallbox can be managed actively. All others (seperate instances) must check this option because of only one instance can receive broadcast messages. This wallbox/instance will be running in passive mode.

Load charging sessions

You can check this option to periodically download the latest charging sessions (30) from your wall box. ATTENTION for users from version v1.1.1 and below: you have to check this option to still receive for charging sessions!

Refresh Interval

This is the interval in seconds how often the wallbox should be queried for new charging values.

The default value is 10 minutes which is a good balance between the load for the KeConnect and having up-to-date information in ioBroker.

PV automatics

To charge your vehicle accordingly to a surplus (e.g. by photovoltaics) you can also define states which represent surplus and regard of main power. These value are used to calculate amperage which can be used for charging. By additional values you can define

  • a state to switch charging phases 1p/3p or using X2 port of Keba Kecontact (with Keba KeContact S10 or any other contactor)
  • a state for current power of battery storage, so the photovoltaics automatics will use it additionally for charging your vehicle
  • an option to limit power of battery storage to just hold charging with minimum power
  • toggle X1 option if you want to use X1 input from charging station to control whether to charge with full power or by photovoltaic automatic
  • a different mimimum amperage than the default 6 A (only needed for e.g. Renault Zoe)
  • a value of regard power that may be used to start charging (that means charging will start even if not enough surplus is available - suggested 0 W for 1 phases charging, 500 W to 2000 W for 3 phases charging)
  • an increment for amperage (suggested 500 mA)
  • a value of regard that may be temporarily used to uphold charging session (that means charging will stop later even if enough surplus is no longer available - starting regard will be added - suggested 500 W)
  • minimum duration of charging session (even if surplus is no longer sufficient, a charging session will last at least this time - suggested 300 sec)
  • time to continue charging session each time surplus is no longer sufficient (to bridge the time on cloudy days)

1p/3p charging

If you have an installation contactor to (dis)connect phase 2 and 3 of your charging station and this switch can be triggered by a state then this adapter is able to start charging with one phase and switch to 3 phases charging if your surplus is sufficient for it. In this case please enter the state for your installation contactor and whetherit is a NO (normally open) or NC (normally close)

batery storage

If you own a battery storage please fill in the options here. By specifiying states for surplus and regard of your battery storage, this adapter can control whether battery storage should be used for charging your vehicle or not, depenent from the strategy preficied in the options.

power limitation

You can also limit max. power of your wallbox to limit main power. E.g. when running night-storage heaters you might have to respect a maximum power limitation. If you enter a value, your wallbox will be limited continously to not pass your power limit. Up to three states of energy meters can be specified for limitation. All values will be added to calculate current consumption. An extra checkbox is used to specified whether wallbox power is included (in this case wallbox power will be subtracted from the state values).

dynamic options

Additionally there are some states to influence behaviour of photovoltaics automatic on the fly, e.g. by a script of your own updating these values according to your needs)

  • kecontact.n.automatic.photovoltaics - actives photovoltaics automatic (true) or will charge vehicle with maximum power when set to false
  • kecontact.n.automatic.calcPhases - defines the current number of phases to be used for charging calculation. This is needed for Keba Deutschland edition and can be used for initial charging session for all charging stations
  • kecontact.n.automatic.addPower - defines an amount of watts of regard allowed to charge your vehicle (same as in options)
  • kecontact.n.automatic.pauseWallbox - stops every charging session immediately as long a set to true
  • kecontact.n.automatic.limitCurrent - limits your charging to specified amperage in mA (0 = no limitation)
  • kecontact.n.automatic.batteryStorageStrategy - strategy whether and how your battery storage should be using for charging your vehicle
  • kecontact.n.automatic.batterySoCForCharging - limit usage of battery torage for vehicle by specifying a SoC below which charging is prohibited

Sample: To charge your vehicle with a constant amperage of 6A regardless of surplus, set photovoltaics to false and limitCurrent to 6000.

Changelog

2.2.0 (2024-06-23)

  • (mcm1957) Adapter requires nodejs >= 18 and js-controller >= 5 now.
  • (mcm1957) Dependencies have been updated.
  • (Sneak-L8) fix url for download page at Keba website
  • (Sneak-L8) fix lint problems by replacing double by single quotes

2.1.1 (2024-03-16)

  • (fischmi) fix error when chanigig dynamic SoC parameter

2.1.0 (2024-01-06)

  • (Sneak-L8) multiple options for battery storage strategy
  • (Sneak-L8) added names for values of some states: state, plug, timeQ and batteryStorageStrategy
  • (Sneak-L8) don't try to charge when state is 5 (auth req, car not ready, ...)
  • (Sneak-L8) new state to dynamically set SoC above which battery storage may be used for charging vehicle

2.0.2 (2023-10-10)

  • (Sneak-L8) default value for minimum regard time (180 seconds)
  • (Sneak-L8) fix calculation of phases for reduced charging
  • (chrisko) added minimum timer to switch between phases if 1p/3p charging is used.
  • (Sneak-L8) disable firmware check for c-series due to changes on webpage of Keba
  • (Sneak-L8) sometimes 1p/3p switch was not working correctly (repeatedly "stop charging fpr switch of phases...")

2.0.1 (2023-07-10)

  • (Sneak-L8) support for Company Car Wall Box MID - GREEN EDITION (sentry IOBROKER-KECONTACT-1K & IOBROKER-KECONTACT-1N) and PV-Edition (sentry IOBROKER-KECONTACT-1M)

Legal

This project is not affiliated directly or indirectly with the company KEBA AG.

KeConnect is a registered trademark of KEBA AG.

License

                             Apache License
                       Version 2.0, January 2004
                    http://www.apache.org/licenses/

TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION

  1. Definitions.

    "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document.

    "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.

    "Legal Entity" shall mean the union of the acting entity and all other entities that control, are controlled by, or are under common control with that entity. For the purposes of this definition, "control" means (i) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (ii) ownership of fifty percent (50%) or more of the outstanding shares, or (iii) beneficial ownership of such entity.

    "You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License.

    "Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.

    "Object" form shall mean any form resulting from mechanical transformation or translation of a Source form, including but not limited to compiled object code, generated documentation, and conversions to other media types.

    "Work" shall mean the work of authorship, whether in Source or Object form, made available under the License, as indicated by a copyright notice that is included in or attached to the work (an example is provided in the Appendix below).

    "Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship. For the purposes of this License, Derivative Works shall not include works that remain separable from, or merely link (or bind by name) to the interfaces of, the Work and Derivative Works thereof.

    "Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner. For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by, or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding communication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution."

    "Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.

  2. Grant of Copyright License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form.

  3. Grant of Patent License. Subject to the terms and conditions of this License, each Contributor hereby grants to You a perpetual, worldwide, non-exclusive, no-charge, royalty-free, irrevocable (except as stated in this section) patent license to make, have made, use, offer to sell, sell, import, and otherwise transfer the Work, where such license applies only to those patent claims licensable by such Contributor that are necessarily infringed by their Contribution(s) alone or by combination of their Contribution(s) with the Work to which such Contribution(s) was submitted. If You institute patent litigation against any entity (including a cross-claim or counterclaim in a lawsuit) alleging that the Work or a Contribution incorporated within the Work constitutes direct or contributory patent infringement, then any patent licenses granted to You under this License for that Work shall terminate as of the date such litigation is filed.

  4. Redistribution. You may reproduce and distribute copies of the Work or Derivative Works thereof in any medium, with or without modifications, and in Source or Object form, provided that You meet the following conditions:

    (a) You must give any other recipients of the Work or Derivative Works a copy of this License; and

    (b) You must cause any modified files to carry prominent notices stating that You changed the files; and

    (c) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices that do not pertain to any part of the Derivative Works; and

    (d) If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works; within the Source form or documentation, if provided along with the Derivative Works; or, within a display generated by the Derivative Works, if and wherever such third-party notices normally appear. The contents of the NOTICE file are for informational purposes only and do not modify the License. You may add Your own attribution notices within Derivative Works that You distribute, alongside or as an addendum to the NOTICE text from the Work, provided that such additional attribution notices cannot be construed as modifying the License.

    You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License.

  5. Submission of Contributions. Unless You explicitly state otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and conditions of this License, without any additional terms or conditions. Notwithstanding the above, nothing herein shall supersede or modify the terms of any separate license agreement you may have executed with Licensor regarding such Contributions.

  6. Trademarks. This License does not grant permission to use the trade names, trademarks, service marks, or product names of the Licensor, except as required for reasonable and customary use in describing the origin of the Work and reproducing the content of the NOTICE file.

  7. Disclaimer of Warranty. Unless required by applicable law or agreed to in writing, Licensor provides the Work (and each Contributor provides its Contributions) on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied, including, without limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License.

  8. Limitation of Liability. In no event and under no legal theory, whether in tort (including negligence), contract, or otherwise, unless required by applicable law (such as deliberate and grossly negligent acts) or agreed to in writing, shall any Contributor be liable to You for damages, including any direct, indirect, special, incidental, or consequential damages of any character arising as a result of this License or out of the use or inability to use the Work (including but not limited to damages for loss of goodwill, work stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.

  9. Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted against, such Contributor by reason of your accepting any such warranty or additional liability.

END OF TERMS AND CONDITIONS

APPENDIX: How to apply the Apache License to your work.

  To apply the Apache License to your work, attach the following
  boilerplate notice, with the fields enclosed by brackets "[]"
  replaced with your own identifying information. (Don't include
  the brackets!)  The text should be enclosed in the appropriate
  comment syntax for the file format. We also recommend that a
  file or class name and description of purpose be included on the
  same "printed page" as the copyright notice for easier
  identification within third-party archives.

Copyright 2021-2024 UncleSamSwiss, Sneak-L8

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

   http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

/iobroker.kecontact/

    Package Sidebar

    Install

    npm i iobroker.kecontact

    Weekly Downloads

    46

    Version

    2.2.0

    License

    Apache-2.0

    Unpacked Size

    365 kB

    Total Files

    15

    Last publish

    Collaborators

    • mcm1957
    • pmant
    • matten-matten
    • simatec
    • dkleber89
    • foxriver76
    • raintonr
    • issi
    • ciddi89
    • dutchmannl
    • patrickwaltherh
    • ruhr70
    • arteck
    • apollon77
    • meistertr
    • prinzeisenherz1
    • bluefox
    • nisiode
    • alcalzone
    • zefau
    • algar42
    • garfonso
    • forelleblau
    • buzzy1337
    • pdbjjens
    • unclesamswiss
    • _shojo_
    • swedish.chef
    • thiemoh
    • sven-s-ter
    • sneak-l8